From:	"John M. Aldrich" <fighteer AT cs DOT com>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: DJGPP header file help!
Date:	Fri, 14 Feb 1997 23:21:25 -0800
Organization:	Two pounds of chaos and a pinch of salt
Lines:	25
Message-ID:	<330563F5.139D@cs.com>
References:	<19970214 DOT 152536 DOT 6606 DOT 0 DOT danmintz AT juno DOT com>
Reply-To:	fighteer AT cs DOT com
NNTP-Posting-Host:	ppp212.cs.com
Mime-Version:	1.0
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp

danmintz AT juno DOT com wrote:
> 
> did everything readme.1st told me to do for the installation, including
> adding the right lines to my autoexec.bat. I read djgpp.env and the
> library and header file path was correct. Why doesn't DJGPP work on my
> new computer?

Please post a system report as outlined in the FAQ (v2/faq210b.zip)
section 6.12.  This should provide sufficient information to diagnose
your problem.

Alternatively, you can try the alpha version of my DJVERIFY installation
diagnostic utility, available as
<ftp://ftp.delorie.com/pub/djgpp/alpha/vrfy033a.zip>.  With any luck, it
will be able to tell you what is wrong with your setup, or at least give
you an easy way to generate a system report.  Any comments are
appreciated, but please remember that the software is an alpha version,
so go easy on it.  :)

-- 
---------------------------------------------------------------------
| John M. Aldrich, aka Fighteer I |        fighteer AT cs DOT com          |
| Proud owner of what might one   |   http://www.cs.com/fighteer    |
| day be a spectacular MUD...     | Plan: To make Bill Gates suffer |
---------------------------------------------------------------------

- Raw text -