From: "John M. Aldrich" Newsgroups: comp.os.msdos.djgpp Subject: Re: DJGPP header file help! Date: Fri, 14 Feb 1997 23:21:25 -0800 Organization: Two pounds of chaos and a pinch of salt Lines: 25 Message-ID: <330563F5.139D@cs.com> References: <19970214 DOT 152536 DOT 6606 DOT 0 DOT danmintz AT juno DOT com> Reply-To: fighteer AT cs DOT com NNTP-Posting-Host: ppp212.cs.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp danmintz AT juno DOT com wrote: > > did everything readme.1st told me to do for the installation, including > adding the right lines to my autoexec.bat. I read djgpp.env and the > library and header file path was correct. Why doesn't DJGPP work on my > new computer? Please post a system report as outlined in the FAQ (v2/faq210b.zip) section 6.12. This should provide sufficient information to diagnose your problem. Alternatively, you can try the alpha version of my DJVERIFY installation diagnostic utility, available as . With any luck, it will be able to tell you what is wrong with your setup, or at least give you an easy way to generate a system report. Any comments are appreciated, but please remember that the software is an alpha version, so go easy on it. :) -- --------------------------------------------------------------------- | John M. Aldrich, aka Fighteer I | fighteer AT cs DOT com | | Proud owner of what might one | http://www.cs.com/fighteer | | day be a spectacular MUD... | Plan: To make Bill Gates suffer | ---------------------------------------------------------------------