From:	Robert Hoehne <Robert DOT Hoehne AT Mathematik DOT tu-chemnitz DOT de>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: RHIDE in 132x50
Date:	Fri, 18 Apr 1997 13:29:06 +0200
Organization:	TU Chemnitz-Zwickau
Lines:	29
Message-ID:	<33575B02.23A9@Mathematik.tu-chemnitz.de>
References:	<m0wHqMb-000S1oC AT natacha DOT inti DOT edu DOT ar> <3356B08E DOT 7AAD AT worldnet DOT att DOT net>
NNTP-Posting-Host:	daemon.hrz.tu-chemnitz.de
Mime-Version:	1.0
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp

Robert Vasquez wrote:
> 
> I entered the mode code for 132x50, and RHIDE said it wasnt supported.

Here is the relevant part from the RHIDE doc (section 3.9.6.3)

Screen mode
...........

[snip]

hexadecimal (preceeded by `0x') number. But you can use only textmodes
(modes
with starting video ram address at `0xB800:0000'. For the numbers of the

[snip]

Please read this and you will see, that RHIDE (currently) supports
only modes which use the 0xb800 segment as video buffer and when
I remeber correct, your wanted mode uses 0xa000 (it is a VESA mode)

Robert
-- 
*****************************************************************
* Robert Hoehne, Fakultaet fuer Mathematik, TU-Chemnitz-Zwickau *
* Post:    Am Berg 3, D-09573 Dittmannsdorf                     *
* e-Mail:  Robert DOT Hoehne AT Mathematik DOT TU-Chemnitz DOT DE              *
* WWW:     http://www.tu-chemnitz.de/~rho                       *
*****************************************************************

- Raw text -