From:	Robert Hoehne <Robert DOT Hoehne AT Mathematik DOT tu-chemnitz DOT de>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: How does RHIDE debug?
Date:	Fri, 28 Feb 1997 11:04:21 +0100
Organization:	TU Chemnitz-Zwickau
Message-ID:	<3316ADA5.712A@Mathematik.tu-chemnitz.de>
References:	<Pine DOT SV4 DOT 3 DOT 94 DOT 970227151621 DOT 10628A-100000 AT aludra DOT usc DOT edu>
NNTP-Posting-Host:	process.hrz.tu-chemnitz.de
Mime-Version:	1.0
Lines:	30
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp

rellwood wrote:
> 
> I can see that RHIDE comes with some program tracing options in the Run
> menu, but how do I use these?  They seem to be ghosted all the time, even
> when I turn on the -g option, which I thought would fix it.  What am I
> missing?

You are missing probably the reading of the RHIDE doc.
And as the next, you should explain the ghostness of RHIDE
a little bit more deatiled because I realy don't understand
what you want.

> Also, does RHIDE have any sort of feature similar to WATCHES or INSPECTORS

Yes of course. Look in the "Debug" menu.

> irritating if I had to shell out to GDB in order to inspect my variables,
> classes, etc.

And as far as I can imagine now, this is also impossible. Or
have you tried it already?

Robert
-- 
*****************************************************************
* Robert Hoehne, Fakultaet fuer Mathematik, TU-Chemnitz-Zwickau *
* Post:    Am Berg 3, D-09573 Dittmannsdorf                     *
* e-Mail:  Robert DOT Hoehne AT Mathematik DOT TU-Chemnitz DOT DE              *
* WWW:     http://www.tu-chemnitz.de/~rho                       *
*****************************************************************

- Raw text -