From:	jz AT bcsupernet DOT com
Newsgroups:	comp.os.msdos.djgpp
Subject:	re: printf("%.6f")
Date:	29 Jan 1997 19:39:13 GMT
Organization:	None
Lines:	35
Message-ID:	<5co911$m3r@clark.zippo.com>
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp

>	The problem is most likely because of something in DJGPP's floating
>point emulation.  Nobody else has reported this sort of thing though, so
>we'd appreciate it if you could post details on your computer's hardware
>(manufacturer, cpu, ram, hd, etc.)  Please also include what version of
>DJGPP you are running (v1.12, v2.00, v2.01), and the output of the
>'go32-v2' command when run from a DOS prompt.
>
>-- 
>John M. Aldrich, aka Fighteer I <fighteer AT cs DOT com>

Ok.  Here's my pathetic excuse for a computer:
		AMD 386DXL 40 MHZ 
		the name on the case is DATASYS  
		Can't tell you who made the motherboard its called 3486-VLB
		whoever wrote the user's manual didn't want to tell who made 
		the board.
		4 Meg 1x9 simms
		1080 M Seagate Hardrive
		The BIOS is AMIBIOS ISA BIOS 1992
		A 4x Samsung Cdrom
		3.5" drive.
		AB-757G V2 Super I/O card
		The graphics card is Oak Super VGA (OTI-077) w/ 512K
		I am using DJGPP V2   GCC 2.7.2
		the Go32-v2 response is:

go32/v2 version 2.0 built Jan 23 1996 22:03:02
Usage: go32 coff-image [args]
Rename this to go32.exe only if you need a go32 that can run v2 binaries as
 well as v1 binaries (old makefiles).  Put ahead of the old go32 in your PATH.
DPMI memory available: 2868 Kb
DPMI swap space available: 15840 Kb

Hope that's enough info....		

- Raw text -