2005-06-08 18:02 danmc * globalconst.h: reduce minimum board size from 1.2 to 0.6 inches 2005-06-08 08:37 danmc * src/Makefile.in: regen [add missing strflags.h] 2005-06-08 08:36 danmc * src/Makefile.am: add missing strflags.h 2005-06-08 07:34 danmc * configure: regen 2005-06-08 07:33 danmc * configure.ac: make sure we still set the X library rpath (yes, it is still possible to use --disable-rpath debian folks). 2005-06-07 21:34 danmc * src/: draw.c, global.h, gui-config.c, gui-output-events.c, gui-top-window.c, gui-utils.c, main.c: convert several c++ style comments to c comments. not all compilers like // 2005-06-03 15:03 djdelorie * src/djopt.c: Avoid name conflict with abs/min/max 2005-05-25 23:32 danmc * configure: regen [error out if m4 not found] 2005-05-25 23:25 danmc * configure.ac: error out if m4 is not found 2005-03-27 20:22 djdelorie * src/strflags.c: Fix the "all pads are ovals" bug. 2005-03-20 21:57 djdelorie * src/strflags.c: Minor bugfixes related to error handling 2005-03-20 21:46 djdelorie * src/: Makefile.am, Makefile.in, file.c, parse_y.y, strflags.c, strflags.h: When saving files, convert flags to symbolic format instead of storing the actual internal bitfield. 2005-03-20 19:35 djdelorie * src/const.h: Put parens around computed macros. Use ~0 instead of -1 for "all bits". 2005-03-16 05:52 danmc * configure: regen (after version bump) 2005-03-15 20:56 danmc * configure.ac: set version 2005-03-15 20:12 danmc * NEWS: add some news for 20050315 2005-03-13 22:41 danmc * src/: gui-icons-misc.data, gui-icons-mode-buttons.data: add some files missed in the gtk-pcb checkin 2005-03-13 09:59 danmc * doc/pcbrc-sample, src/file.c, src/global.h, src/gui-config.c, src/gui-top-window.c, src/gui.h, src/main.c, src/misc.c, src/misc.h, src/pcbtest.sh.in: add some config file patches from Bill Wilson 2005-03-11 21:27 danmc * doc/Makefile.in: regen after Makefile.am pullup 2005-03-11 21:23 danmc * doc/Makefile.am: pullup rev 1.10. Adds some missing files to EXTRA_DIST 2005-03-11 21:17 danmc * README-GTK_PORT, configure, configure.ac, globalconst.h, doc/version.texi, po/fr_FR.po, po/pcb.pot, src/Makefile.am, src/Makefile.in, src/Pcb.ad.in, src/action.c, src/action.h, src/autoplace.c, src/autoroute.c, src/buffer.c, src/change.c, src/clip.c, src/clip.h, src/command.c, src/command.h, src/const.h, src/create.c, src/crosshair.c, src/data.c, src/data.h, src/dev_ps.c, src/dev_rs274x.c, src/djopt.c, src/djopt.h, src/draw.c, src/draw.h, src/drill.c, src/error.c, src/error.h, src/file.c, src/file.h, src/find.c, src/global.h, src/gui-command-window.c, src/gui-config.c, src/gui-dialog-print.c, src/gui-dialog-size.c, src/gui-dialog.c, src/gui-keyref-window.c, src/gui-library-window.c, src/gui-log-window.c, src/gui-misc.c, src/gui-netlist-window.c, src/gui-output-events.c, src/gui-pinout-window.c, src/gui-top-window.c, src/gui-utils.c, src/gui.h, src/heap.c, src/insert.c, src/intersect.c, src/line.c, src/macro.h, src/main.c, src/menu.h, src/misc.c, src/misc.h, src/move.c, src/mtspace.c, src/mymem.c, src/output.c, src/output.h, src/parse_l.l, src/parse_y.y, src/pcb-menu.res, src/pcbtest.sh.in, src/polygon.c, src/print.c, src/rats.c, src/rats.h, src/report.c, src/res_parse.y, src/rotate.c, src/rtree.c, src/select.c, src/select.h, src/set.c, src/set.h, src/undo.c, src/vector.c, src/vendor.c, src/vendor.h, src/script/pcb.in: Import Bill Wilson's port of pcb to gtk. Things seem to compile and run but this should be considered a work in progress at the moment. 2005-03-11 21:09 danmc * doc/Makefile.in: regen 2005-03-11 21:06 danmc * doc/Makefile.am: add a few missing files to EXTRA_DIST 2005-03-11 07:10 danmc * configure: regen 2005-03-11 07:07 danmc * configure.ac: indicate that this is the xaw branch 2005-03-10 17:56 danmc * ChangeLog: update with latest changes 2005-03-10 17:33 danmc * Makefile.in, README_FILES/Makefile.in, doc/Makefile.in, doc/version.texi, example/Makefile.in, example/libraries/Makefile.in, lib/Makefile.in, newlib/Makefile.in, newlib/2_pin_thru-hole_packages/Makefile.in, newlib/analog-devices/Makefile.in, newlib/burr-brown/Makefile.in, newlib/connectors/Makefile.in, newlib/crystal/Makefile.in, newlib/cypress/Makefile.in, newlib/electro-optics/Makefile.in, newlib/generic_SMD_packages/Makefile.in, newlib/headers/Makefile.in, newlib/msp430/Makefile.in, newlib/not_vetted_ingo/Makefile.in, newlib/sockets/Makefile.in, newlib/tests/Makefile.in, newlib/toko/Makefile.in, src/Makefile.in, src/icons/Makefile.in, src/script/Makefile.in, tools/Makefile.in, tutorial/Makefile.in: regen after adding gtk configure.ac stuff 2005-03-10 17:32 danmc * autogen.sh: use ACLOCAL_FLAGS if set 2005-03-10 17:22 danmc * lib/: geda.inc, misc.inc, to.inc: add MULTIWATT and friends. Fix drill size for several versions of the TO-220 package, fix some bugs which caused several TO-220 packages and others to generate syntax errors, and fix the drill size on several TO-* packages. You can't fit a 40 mil pin in a 20 mil hole! 2005-02-23 09:05 djdelorie * src/: global.h, main.c, print.c: Allow FAB author name to be set by .Xdefaults 2005-02-09 19:19 danmc * src/action.h: add a few missing prototypes 2005-02-09 18:36 danmc * aclocal.m4: regen 2005-02-09 18:34 danmc * configure: regen after adding --enable-gtk and --disable-xaw 2005-02-09 18:32 danmc * configure.ac: add --enable-gtk and --disable-xaw configure flags which will turn on the configuring of gtk+ and turn off the configuring of Athena widgets respectively. At this time the effect is that you will not be able to compile if you use these options. They are added to help support some gtk+ development work. 2005-02-02 17:37 danmc * src/: data.c, dialog.c, printdialog.c: fix a segfault bug when using Up and Down to try and adjust the scale slider in the print dialog box. While here fix up the print dialog box so that you can use the arrow keys to fine adjust the scale slider. Noted in bug #1111847 filed by Bob Paddock. 2005-02-01 20:59 danmc * src/rotate.c: fix a segfault bug on the pinout window (no null pointer dereference) 2005-02-01 20:59 danmc * src/Pcb.ad.in: change units to 1/100 mil for pinout window offset 2005-01-30 14:01 danmc * lib/geda.inc: Add DIP44. Provided by Walter Fetter Lages in patch #1108881 2005-01-30 09:05 danmc * lib/misc.inc: fix drill size for ZIP packages. Noted by Walter Fetter Lages in patch #1108881 2005-01-29 20:09 danmc * lib/connector.inc: fix drill size for PKG_BNC_LAY. Provided by Walter Fetter Lages in patch #1108881 2005-01-29 19:34 danmc * lib/geda.inc: add TQFP packages provided by Walter Fetter Lages in patch #1108881. More to come from that patch... 2005-01-29 08:58 danmc * doc/Makefile.in: regen 2005-01-29 08:57 danmc * doc/Makefile.am: add flag to keep building the html manual as a single page. Having multiple pages seems to do strange things to the install. 2005-01-28 20:01 danmc * doc/Makefile.am: fix typo in target for creating texi files from the ascii list of drills 2005-01-28 19:59 danmc * doc/: Makefile.in: regen 2005-01-28 19:59 danmc * doc/: Makefile.am, ascii2texi.awk, fractional_size.tab, letter_size.tab, metric_size.tab, pcb.texi, wire_size.tab: add an appendix with a big list of drill sizes. Included are American Standard wire size, letter size, fractional size, and metric. 2005-01-27 18:15 danmc * configure, doc/version.texi: set version for snapshot 2005-01-27 06:26 danmc * configure.ac: change version for snapshot 2005-01-27 06:19 danmc * NEWS: add news for snapshot 20050127 2005-01-26 21:38 danmc * ChangeLog: update to get ready for next snapshot 2005-01-26 21:36 danmc * Makefile.in, aclocal.m4, README_FILES/Makefile.in, doc/Makefile.in, example/Makefile.in, example/libraries/Makefile.in, lib/Makefile.in, newlib/Makefile.in, newlib/2_pin_thru-hole_packages/Makefile.in, newlib/analog-devices/Makefile.in, newlib/burr-brown/Makefile.in, newlib/connectors/Makefile.in, newlib/crystal/Makefile.in, newlib/cypress/Makefile.in, newlib/electro-optics/Makefile.in, newlib/generic_SMD_packages/Makefile.in, newlib/headers/Makefile.in, newlib/msp430/Makefile.in, newlib/not_vetted_ingo/Makefile.in, newlib/sockets/Makefile.in, newlib/tests/Makefile.in, newlib/toko/Makefile.in, src/Makefile.in, src/icons/Makefile.in, src/script/Makefile.in, tools/Makefile.in, tutorial/Makefile.in: update to latest automake 2005-01-26 20:49 danmc * src/: Pcb.ad.in, main.c: change pcb to Pcb in a commented out resource 2005-01-26 20:45 danmc * lib/: geda.inc, misc.inc: fix the LED3 and LED5 footprints for T-1 and T-1 3/4 (3mm and 5mm) standard LED's. The old footprint had drill holes which were too small and also there was silk on the pad. 2005-01-25 20:35 danmc * lib/plcc.inc: increase the padsize and drill size for through-hole PLCC sockets 2005-01-25 13:20 djdelorie * src/pcb-menu.res: Oops, take out test entry 2005-01-25 13:07 djdelorie * src/: menu.c, pcb-menu.res, resmenu.c, resmenu.h: Move right-click popup menu to pcb-menu.res also. 2005-01-21 18:19 danmc * doc/version.texi: bump date 2005-01-21 17:46 danmc * src/create.c: do not complain about MIN_PINORVIACOPPER on a mounting hole 2005-01-21 17:25 danmc * src/: Pcb.ad.in, main.c, set.c: - break the status line into 2 lines as it was getting rather long - put the cursor position line below the menu as it is also getting rather long with the metric display. Besides keeping the 2 lines from being cutoff on smaller displays, it seems to avoid some of the strange Xaw issues seen in bug #1099862 and patch #1042731 where the porthole for the main drawing area is not properly sized and where the status line is sometimes covered by the porthole. 2005-01-21 17:21 danmc * src/Makefile.in: regen 2005-01-21 17:18 danmc * src/Makefile.am: for the .test/Pcb apps-default file (the one used when running before installation), use the pcb-menu.res file in the source directory. 2005-01-21 17:15 danmc * src/action.c, src/pcb-menu.res, doc/pcb.texi: Add "Selected" and "All" arguments to DisperseElements so you have the option to not disperse all of them. Add corresponding menu choices. 2005-01-18 18:13 danmc * src/print.c: avoid having text overlaying text in the fab drawing when a very small number of drill sizes are used. Problem reported in bug #1100163. Patch provided by Mick. 2005-01-17 23:40 danmc * configure: regen 2005-01-17 23:38 danmc * configure.ac: add a --disable-rpath flag to disable hardcoding of the X11 library path. Default behaviour is unchanged. 2005-01-16 23:08 danmc * src/main.c: use LAYOUT_BOTTOM to always put the status line at the bottom of the main window. Gets rid of some annoying bugs on solaris and some other systems where the status line would sometimes get covered up when the window was resized. 2005-01-16 22:54 danmc * src/create.c: in the message log produced when a via size has to be increased to meet the minimum copper, add a location to make it easier to locate the via. 2005-01-16 22:46 danmc * src/: Pcb.ad.in, main.c: Increase Pcb.masterForm*cursorPosition.width to make room for metric display. Provided by Mark Whitis in patch #1042731 2005-01-16 20:05 danmc * doc/pcb.texi: add docs for ChangeClearSize() action. Also apply some other fixes provided in patch #1068842 2005-01-13 19:31 danmc * lib/misc.inc: increase quoting of $2 in PKG_CRYSTAL to avoid the refdes from being expanded by m4. Lets you use "X1" as the refdes in gschem and gsch2pcb 2005-01-13 17:30 danmc * README_FILES/Makefile.in: regen 2005-01-13 17:29 danmc * doc/version.texi: udate data 2005-01-13 17:15 danmc * src/pcb-menu.res: add DisperseElements() to menu 2005-01-13 17:13 danmc * src/: control.c, main.c, resmenu.c: remove some more compiler warnings 2005-01-13 17:08 danmc * doc/pcb.texi, src/action.c, src/action.h, src/main.c: add a DisperseElements() action which will disperse all elemnents in a layout. The purpose is to spread out elements which are all on top of each other at the very beginning of a design. 2005-01-06 18:27 danmc * README, README_FILES/LICENSE, README_FILES/MAILING, README_FILES/Makefile.am, README_FILES/README: remove duplicated files and fix some out of date info 2005-01-05 22:46 danmc * src/: djopt.c, rtree.c: cast some pointers to (void *) when printing debug output. reduces the # of compiler warnings 2005-01-03 07:56 danmc * src/: action.c, autoplace.c, autoroute.c, box.h, buffer.c, buffer.h, change.c, change.h, clip.c, clip.h, copy.c, copy.h, create.c, create.h, crosshair.c, crosshair.h, data.c, data.h, dev_ps.c, dev_rs274x.c, draw.c, file.c, find.c, find.h, global.h, insert.c, insert.h, intersect.c, line.c, macro.h, mirror.c, mirror.h, misc.c, misc.h, move.c, move.h, mtspace.c, output.c, output.h, pinout.c, polygon.c, polygon.h, print.c, print.h, printdialog.c, rotate.c, rotate.h, rubberband.c, search.c, search.h, set.c, set.h, undo.c, undo.h: change "Location" to "LocationType". Avoids some confusion with some compilers (SunPRO in particular) when "Location" is also used as part of a struct. 2004-12-31 00:11 danmc * src/vendor.c: move the regfree() call _before_ the return from the function that calls it so that it actually happens. 2004-12-11 19:12 danmc * src/vendor.c: remove a compiler warning 2004-11-20 17:25 danmc * src/set.c: add metric output to the location display. Based on patches provided in patch #1042731 by Mark Whitis 2004-11-20 17:20 danmc * src/main.c: adjust Pcb.masterForm*cursorPosition.width to match the app-defaults file value 2004-11-20 09:30 danmc * src/actionlist.c: revert previous. Seems to have snuck in by mistake in the strcmp() cleanup. 2004-11-20 09:15 danmc * src/pcb-menu.res: add . as the hotkey for toggling 45 degree line mode. addressed bug #1069665 filed by Mark Whitis. 2004-11-18 23:12 haceaton * src/crosshair.c: Snap to pads go to pad centers and allow snapping to element mark too. ---------------------------------------------------------------------- 2004-11-18 22:08 haceaton * src/: action.c, actionlist.c, autoplace.c, create.c, dev_rs274x.c, dialog.c, djopt.c, draw.c, file.c, fileselect.c, macro.h, main.c, misc.c, netlist.c, print.c, rats.c, res_parse.y, search.c, selector.c, set.c, vendor.c: Replace all strcmp with a macro that tests for NULL pointers ---------------------------------------------------------------------- 2004-11-08 00:36 danmc * src/control.c: Restore translation table for the mode buttons. This seems to fix the "mode buttons are not responsive" bug reported in bug #716517 Patch provided by Daniel Nilsson in patch #1023078. 2004-11-07 09:46 haceaton * src/: change.c, change.h: Allow element names to be edited over the name itself ---------------------------------------------------------------------- 2004-11-01 22:38 danmc * src/Pcb.ad.in: Fix the . binding to toggle 45 degree mode. Addresses bug #1022800 2004-11-01 06:58 danmc * config.h.in, configure: regen [add support for ElectricFence debugging. --enable-efence] 2004-11-01 06:57 danmc * configure.ac: add support for ElectricFence debugging. --enable-efence 2004-11-01 06:52 danmc * doc/: pcb.texi, version.texi: clarify the units used by PCB a bit 2004-10-31 01:50 danmc * doc/pcb.texi, src/vendor.c: Allow the use of regular expressions in the resources which specify elements which should not have their drill holes mapped to the vendor table. 2004-10-30 02:56 danmc * src/: pcb-menu.res, vendor.c: Modify the LoadVendor() action so if the file name is not give, the user is presented with a file selection dialog box to choose a file. Also add a menu choice for this. 2004-10-30 02:30 danmc * src/script/pcb.in: Quote "$@" to keep args whole 2004-10-29 09:05 danmc * src/: Makefile.am, Makefile.in: add missing vendor.h 2004-10-29 02:08 danmc * doc/pcb.texi: document vendor drill mapping 2004-10-29 02:07 danmc * src/: Makefile.in, actionlist.c: regen after adding vendor resource/mapping code 2004-10-29 02:07 danmc * src/: Makefile.am, action.c, change.c, change.h, create.c, pcb-menu.res, vendor.c, vendor.h: Add support for a loadable vendor resource. The primary purpose is to import a list of vendor supported or prefered drill sizes. The design is then modified to change drills to sizes in the drill list. Additionally, the vendor resource file may include DRC settings. 2004-10-27 10:36 djdelorie * src/resmenu.c: Support multiple actions per line for -action and -script 2004-10-27 10:28 djdelorie * src/pcbtest.sh.in: Quote "$@" to keep args whole 2004-10-27 10:23 djdelorie * src/: actionlist.c, global.h, main.c, resmenu.c: Add -action command line, to execute one action string at startup 2004-10-27 10:11 djdelorie * src/: pcb-menu.res, res_lex.l: Add support for comments. Comments begin with '#' and extend to the end of the line. 2004-10-27 10:10 djdelorie * doc/: pcb.texi, version.texi: Document resource file comments 2004-10-25 21:38 danmc * src/dialog.c: remove unused variable, make sure return returns a value on a non-void fn 2004-10-25 06:55 danmc * src/dialog.c: Add date and compile time to the About dialog. Patch provided as patch #1053444 by Bob Paddock. 2004-10-24 22:10 danmc * src/buffer.c: Fix one more (last one maybe?) hires bug where when converting a selection or buffer to element, the soldermask relief is 100x smaller than the default. Address bug report #1049033. 2004-10-24 22:00 danmc * Makefile.in, README_FILES/Makefile.in, example/Makefile.in, example/libraries/Makefile.in, lib/Makefile.in, newlib/Makefile.in, newlib/2_pin_thru-hole_packages/Makefile.in, newlib/analog-devices/Makefile.in, newlib/burr-brown/Makefile.in, newlib/connectors/Makefile.in, newlib/crystal/Makefile.in, newlib/cypress/Makefile.in, newlib/electro-optics/Makefile.in, newlib/generic_SMD_packages/Makefile.in, newlib/headers/Makefile.in, newlib/msp430/Makefile.in, newlib/not_vetted_ingo/Makefile.in, newlib/sockets/Makefile.in, newlib/tests/Makefile.in, newlib/toko/Makefile.in, src/Makefile.in, src/icons/Makefile.in, src/script/Makefile.in, tools/Makefile.in, tutorial/Makefile.in: regen so that all Makefile.in files came from the same version of automake 2004-10-24 21:59 danmc * doc/version.texi: update date on manual since there have been additions 2004-10-22 23:39 danmc * doc/pcb.texi: minor fixups to make this happy again with the new texinfo.tex 2004-10-22 23:38 danmc * doc/texinfo.tex: update to texinfoversion 2004-09-06.16 2004-10-21 18:49 haceaton * src/change.c: Fix borking of name_tree when changing an element name ---------------------------------------------------------------------- 2004-10-21 18:16 danmc * doc/Makefile.in: regen 2004-10-21 18:14 danmc * doc/Makefile.am: - override the mostlyclean-aminfo target to avoid deleting the .dvi, .html, .pdf, and .ps versions of the manual with 'make clean'. Since these files already go in the distfile, we don't want a 'make clean' to remove them as that would force a dependency on TeX. This issue was noted by Stuart Brorson. - while here let automake handle the html and pdf conversions automatically. This ends up defaulting to texi2pdf for PDF which seems to do a better job than ps2pdf anyway. 2004-10-21 18:11 danmc * aclocal.m4, configure: regen 2004-10-21 18:04 danmc * configure.ac: check for ps2pdf which is used for building the refcard 2004-10-21 18:02 danmc * acinclude.m4: improve the quoting so that aclocal-1.9.2 is happier 2004-10-20 08:21 danmc * doc/pcb.texi: minor fixup in the newlib element creation guide. 2004-10-19 21:02 danmc * doc/pcb.texi: Apply several improvements from Bob Paddock including: - spell check - improved section on modifying newlib footprints - add section on searching for elements - add section on measurements - add appendix on regular expressions Some texinfo fixes from me. 2004-10-17 01:40 djdelorie * src/resmenu.c: Sort actions by modifier so that both Ctrlx and x work. 2004-10-17 01:40 djdelorie * src/actionlist.c: Regenerated 2004-10-17 01:16 djdelorie * src/action.c: Add FlagHaveRegex (have_regex) so that the SelectByName menu entries work. 2004-10-12 09:16 djdelorie * src/global.h: Oops, overzealous patching ;-) 2004-10-12 09:13 djdelorie * src/global.h: add non-gcc definition of ATTRIBUTE_UNUSED 2004-10-12 08:09 danmc * src/global.h: add missing #else clause in defining ATTRIBUTE_UNUSED on non-gcc or older gcc version. Problem noted by Dave McGuire. 2004-10-08 12:56 djdelorie * src/rats.c: Check for numberless pins. 2004-10-07 22:30 djdelorie * src/print.c: Print plated and unplated hole counts on separate lines. 2004-10-06 16:04 djdelorie * src/print.c: Avoid checking pin numbers for unnumbered pins. 2004-09-23 22:55 djdelorie * src/: actionlist.c, data.c, dialog.c, global.h, main.c: Add command history to : widget. 2004-09-23 22:02 danmc * README.snapshots: minor tweaks to instructions 2004-09-21 00:37 haceaton * src/: draw.c, move.c, pinout.c: Fixes for pinout window crash. Still need to fix pinout scroll range at high zoom 2004-09-20 23:51 haceaton * src/misc.c: Fix error on non-quarter circle arc bounding box calculations 2004-09-20 22:31 haceaton * src/menu.c: Don't ask for X,Y coordinates in third-button pop-up menu; the coordinate is where the cursor was when the menu was popped up. 2004-09-20 22:16 haceaton * src/draw.c: Fixed return value of Emark_callback. (Didn't really matter, we weren't count number of marks drawn). 2004-09-20 21:48 haceaton * src/action.c: Allow Ctrl-drag to copy objects in arrow mode. 2004-09-20 21:46 haceaton * src/polygon.c: Fix bug with polygon clearances from other layers in the group. 2004-09-08 00:05 danmc * src/set.c: add an extra digit to the display of metric measurements. Patch from Gabriel Paubert. 2004-09-03 20:35 danmc * NEWS: mention the background image in 20040903 2004-09-03 18:12 danmc * NEWS: update with pcb-20040903 news items 2004-09-03 07:43 danmc * aclocal.m4, configure, doc/version.texi: regen for pcb-20040903 2004-09-03 00:28 danmc * configure.ac: set version for snapshot 2004-09-03 00:04 danmc * ChangeLog: update to get ready for next snapshot 2004-09-03 00:02 danmc * README.snapshots: add more detailed snapshot instructions 2004-08-30 07:54 danmc * src/: resmenu.h, main.c: add missing headers 2004-08-30 07:29 danmc * src/parse_y.y: add missing prototype 2004-08-30 07:26 danmc * src/find.c: remove unused variable 2004-08-30 07:21 danmc * src/res_lex.l: add missing prototype 2004-08-29 23:32 danmc * src/res_parse.y: clean up a few more compiler warnings 2004-08-29 23:13 danmc * src/djopt.c: get rid of a bunch of format string compiler warnings along with some unused variable warnings 2004-08-29 22:52 danmc * src/: action.c, autoplace.c, autoroute.c, buffer.c, change.c, clip.c, command.c, compat.c, control.c, copy.c, create.c, crosshair.c, data.c, dev_ps.c, dev_rs274x.c, dialog.c, djopt.c, draw.c, drill.c, error.c, file.c, fileselect.c, find.c, global.h, gui.c, heap.c, insert.c, intersect.c, lgdialog.c, library.c, line.c, log.c, main.c, menu.c, mirror.c, misc.c, move.c, mtspace.c, mymem.c, netlist.c, output.c, parse_l.l, parse_y.y, pinout.c, polygon.c, print.c, printdialog.c, printpanner.c, rats.c, remove.c, report.c, res_lex.l, res_parse.y, resmenu.c, rotate.c, rtree.c, rubberband.c, search.c, select.c, selector.c, set.c, sizedialog.c, undo.c, vector.c: rework the lines which have static char *rcsid=.... to include an unused attribute on gcc. This gets rid of a bunch of gcc -Wall warnings which can cause some actual bugs to be lost in the noise. While here, make sure we include config.h and also dmalloc.h if dmalloc debugging has been requested. 2004-08-28 21:46 danmc * src/draw.c: fix a "=" instead of "==" bug 2004-08-28 08:41 danmc * README.cvs: update this to more closely match the current reality 2004-08-28 08:33 danmc * src/actionlist.c: add actionlist.c for non-maintainers 2004-08-28 01:25 danmc * configure: regen (if we are using gcc then add -Wall) 2004-08-28 01:24 danmc * configure.ac: if we are using gcc then add -Wall 2004-08-27 18:04 danmc * src/draw.c: add missing header (for isdigit) 2004-08-27 18:01 danmc * src/dev_rs274x.c: use long int in some places to avoid assigning a long int to an int 2004-08-27 18:01 danmc * src/: action.c, rtree.c: remove some unused variables 2004-08-27 17:57 danmc * src/: output.c, resmenu.c: add a missing header 2004-08-27 17:57 danmc * src/main.c: remove an unused variable 2004-08-26 22:21 danmc * doc/version.texi: bump updated date 2004-08-26 21:54 danmc * doc/Makefile.in: regen (add pcb.1 to EXTRA_DIST) 2004-08-26 21:53 danmc * doc/Makefile.am: add pcb.1 to EXTRA_DIST 2004-08-26 21:04 danmc * doc/pcb.texi: document the ExecuteFile() action and the -script command line option 2004-08-26 20:58 danmc * src/: global.h, main.c, misc.c, resmenu.c: add an ExecuteFile(file) action which executes the actions contained in the specified file. In addition, add a "-script " option which will invoke ExecuteFile() upon startup. Eventually (but not yet) this will be able to be used for things like generating postscript and RS-274-X output from the command line. 2004-08-25 21:58 danmc * src/resmenu.c: Fix a minor memory leak bug which allocated space for 10 more pointers everytime invoke_action() was called. While here add a few comments about whats going on in this function. 2004-08-24 22:38 danmc * doc/pcb.texi: update the table of the output files generated by PCB 2004-08-24 22:37 danmc * src/pcb-menu.res: use "Reference Designator" instead of "Name on PCB" as the former is more standard 2004-08-24 22:27 danmc * src/file.c: exclude Makefile, Makefile.am, and Makefile.in as valid element names as these may reside in a lib directory 2004-08-24 22:22 danmc * doc/pcb.texi: add a brief comment about what M4 is and where to find more info 2004-08-24 21:59 danmc * src/action.c: add one more Usage message. this time for the RemoveSelected() action 2004-08-24 21:07 danmc * src/: main.c, misc.c: allow --version, --help, and --copyright to also work since those are typically supported by GNU programs. 2004-08-24 21:03 danmc * src/misc.c: In the Usage() function be sure to restore stderr at the beginning since this function calls exit(). This will ensure that the Usage() message can actually be seen in all cases. Fixes the following: clock@oberon:~$ pcb --version clock@oberon:~$ noted by Karel Kulhav on the gEDA mailing list. 2004-08-24 17:49 danmc * doc/Makefile.in: regen after adding pcb.1 2004-08-24 17:44 danmc * doc/: pcb.1, Makefile.am: add a man page which says where to look for the manual 2004-07-30 23:29 danmc * src/find.c: avoid 'inline' unless we're using gcc. 2004-07-30 23:26 danmc * src/res_parse.y: use foo?foo:bar instead of foo?:bar as the latter is a gcc extension. Makes the irix c compiler happy. 2004-07-28 21:50 danmc * lib/geda.inc: update the 150 and 300 mil width SOIC packages per the IPC recommendations at footprint.ipc.org. Partially addresses the "silk on pad" bug noted in bug report #995401. 2004-07-28 21:48 danmc * lib/smt.inc: improve the decision on adding or not adding a silk arc on the COMMON_SMT_DIL_MIL macro 2004-07-16 23:14 haceaton * src/print.c: Only clear silk on same side as pad. Patch contributed by burto 2004-07-09 23:42 djdelorie * doc/pcb.texi, src/draw.c, src/draw.h, src/global.h, src/main.c, src/misc.c: Add limited support for a behind-the-board background image. 2004-07-07 21:32 danmc * src/rubberband.c: Fix a bug related to checking for the intersection of a circular region defined by an line end point and its radius and a rectangular pin/pad. The old code looked for the intersection of the smallest square which encloses the circular region and the rectangular pin/pad region. However this method claims that there are intersections when in fact there are not. For example a very wide trace has a significant area enclosed by the square which encloses the circular region defined by the line end and radius that is not enclosed by the circular region. The new code actually looks for intersection of the circular region and the square region. 2004-07-07 19:59 danmc * src/rubberband.c: fix some errors where the diameter was used where the radius should have been used when looking for circular regions which intersect. Fixes bug report #978412. Partial patch provided in the bug report, additional bugs fixed by me. Note: a bug still exists when calculating line -> rectangular pad intersection. A fix will be coming. 2004-07-01 22:02 haceaton * src/undo.c: Fix UndoChangeMaskSize assuming LINESTRUCT has the mask parameter 2004-06-30 19:28 danmc * src/: pcbtest.sh.in, script/pcb.in: when running under gdb set XAPPLRESDIR and unset XUSERFILESEARCHPATH 2004-06-30 19:24 danmc * src/resmenu.c: make 'str' static so that the memory allocated by MyStrdup() can properly be freed on the next call of invoke_action. 2004-06-25 19:04 djdelorie * src/pcb-menu.res: Change size of selected objects, fix enlarge options to actually enlarge (bug 978408) 2004-06-25 18:58 djdelorie * src/menu.c: Cut and Copy from the popup menu now wait for a click before acting (bug 978406) 2004-06-24 11:05 djdelorie * src/: Pcb.ad.in, main.c, menu.c, pcb-menu.res, resmenu.c, resmenu.h: Add support for menu accelerators. Replace hotkey translations with menu accelerators where appropriate. 2004-06-20 17:33 djdelorie * src/: Makefile.am, Makefile.in: Run gather-actions only if maintainer-mode 2004-06-15 09:32 haceaton * src/: action.c, autoroute.c, const.h, menu.c, pcb-menu.res: Fix live routing menu handling; patch segfault on breaking element with no element specified. Autorouter tweaks. 2004-06-10 18:48 danmc * lib/geda.inc: add a few more 400mil width DIP packages (DIPxM) 2004-06-09 20:22 danmc * src/dev_rs274x.c: make sure we define all aperture codes used by arcs. Fixes the bug reported in bug #969903 by Werner Hoch where an arc of a width not used by anything else in the layout does not have its aperture defined. 2004-06-09 19:09 danmc * src/find.c: fix the function name strings passed to MyCalloc(). 2004-06-09 00:15 danmc * src/pcb-menu.res: Do not arbitrarily change the zoom setting whenever running DRC. Especially if there are no DRC errors, we don't want/need to change the zoom. Noted by Mark Becker. 2004-06-09 00:14 danmc * src/pcb-menu.res: Add 0.5 and 0.1 mil grid selections. Requested in RFE #876549 by John Griessen. 2004-06-09 00:12 danmc * src/: find.c, misc.c, misc.h: Save layerstack settings prior to running DRC and restore them afterwards so that things like current input layer are not changed by DRC. Noted by Mark Becker. 2004-06-04 23:33 danmc * configure: regen after rpath flag order change 2004-06-04 23:32 danmc * configure.ac: change the order in the list of rpath flags which are tried out. This is because when -R was tried first, it was accepted on linux systems because even though gcc didn't like it, it still exited with 0. The new order seems to do the right thing on solaris, linux, and netbsd as the compiler now actually gives an error code for the flags it does not like. 2004-06-04 22:21 djdelorie * src/djopt.c: Be even more picky about which line is chosen as an example. 2004-06-04 19:01 danmc * configure: regen (If --enable-dmalloc is given but dmalloc is not found then error out instead of disabling dmalloc 2004-06-04 19:00 danmc * configure.ac: If --enable-dmalloc is given but dmalloc is not found then error out instead of disabling dmalloc 2004-06-03 19:06 danmc * src/action.c: add usage output for several more actions 2004-06-02 20:45 danmc * src/action.c: Add usage output if the input arguments are not quite right for several actions. Still have more to add, but this is a start. 2004-06-01 20:45 danmc * src/default_font: add @ character. Absence noted by Dave McGuire. 2004-06-01 19:29 danmc * src/pcb-menu.res: add a GetXY() to the 'copy selection to buffer' menu. Needed to have a resonable reference point for the copy. Noted by Mark Becker. 2004-06-01 19:18 danmc * configure: regen (fail configuration if Xaw is not found) 2004-06-01 19:18 danmc * configure.ac: fail configuration if Xaw is not found 2004-05-31 08:28 danmc * README.snapshots: add a note to remember to do something better with versions on the next snapshot 2004-05-31 08:15 danmc * NEWS: remove duplicated line 2004-05-30 20:51 danmc * ChangeLog: update changelog with cvs2cl.pl. This file previously was empty. 2004-05-30 20:49 danmc * doc/version.texi: bump updated date to match snapshot date 2004-05-30 20:46 danmc * NEWS: add some release notes for the upcoming 20040530 snapshot 2004-05-29 14:57 danmc * src/change.c: add missing prototype 2004-05-28 22:26 danmc * globalconst.h: set MASKFRAME to be 3 (mils) instead of 0. This way the soldermask opening will be larger than the pads for components defined using the older style format which did not explicitly give soldermask relief size. 2004-05-28 21:47 danmc * doc/pcb.texi: document the SetFlag(), ClrFlag(), and ChangeFlag() actions 2004-05-28 21:38 danmc * doc/pcb.texi: correct location for Pcb appdefaults file 2004-05-28 20:15 danmc * src/: pcbtest.sh.in, script/pcb.in: For the pcb wrapper script, if the first argument is "-gdb", pick off that flag and run pcb inside of the gdb debugger. Should simplify debugging a bit. 2004-05-28 20:13 danmc * src/: action.c, action.h, change.c, change.h, main.c: Add SetFlag, ClrFlag, and ChangeFlag actions. These currently let you set, clear, or change the square, octagon, or thermal pads. For example :SetFlag(SelectedVias,thermal) :ClrFlag(SelectedObjects,square) :ChangeFlag(SelectedPads,octagon,1) 2004-05-27 23:17 danmc * src/djopt.c: Fix the segfault bug noted in bug report #959073 by Bob Paddock. While here, also fix a bug which can potentially cause a floating point exception. 2004-05-27 23:15 danmc * config.h.in, configure: regen after adding rint() test 2004-05-27 23:12 danmc * configure.ac: add test for rint() 2004-05-26 22:11 danmc * doc/version.texi: bump date 2004-05-26 22:10 danmc * doc/pcb.texi: add INFO-DIR-SECTION Miscellaneous per bug #957369 submitted by Mike Frysinger 2004-05-23 14:57 danmc * lib/smt.inc: update the COMMON_SMT_2PAD_MIL macro to the newer element format. With this change, the soldermask relief and clearance can now be specified for the pads. This fixes the issue noted recently on the geda mailing list about 0805 footprints from the ~geda library having soldermask openings which are the same size as the pads. 2004-05-14 17:23 danmc * src/dev_ps.c: make sure we get the preamble in all EPS output files. Bug noted by David Koski 2004-05-14 17:22 danmc * lib/geda.inc: add SOJ packages (lots of them) 2004-05-14 17:22 danmc * lib/smt.inc: fix a hi-res bug in the polarity arc silk for some SMT DIL pkgs 2004-05-14 17:22 danmc * src/res_parse.y: add missing string.h (for strcmp). Noted by Dave McGuire 2004-05-13 22:59 danmc * src/: pcbtest.sh.in, script/pcb.in: unset XUSERFILESEARCHPATH which causes a conflict with XAPPLRESDIR 2004-05-13 22:29 danmc * src/resource.h: add a comment 2004-05-13 18:09 danmc * src/misc.c: correct the pin/pad bounding box calculation. Bug noted by David Koski. 2004-05-04 23:47 danmc * src/macro.h: fix typo in comment 2004-05-02 01:02 djdelorie * src/: djopt.c, pcb-menu.res: Add flag to default to optimizing only autorouted nets, plus menu option to control it. 2004-05-02 00:26 djdelorie * src/resmenu.c: Don't use local var for widget name. 2004-05-02 00:23 djdelorie * src/djopt.c: Fix bug wrt intersecting layer groups in miter 2004-05-01 23:40 djdelorie * src/: menu.c, resmenu.c: Remove gcc-isms 2004-05-01 00:44 danmc * doc/pcb.texi: fix typo 2004-05-01 00:29 danmc * src/resmenu.c: protect the inclusion of string.h with HAVE_STRING_H 2004-04-30 18:55 danmc * lib/minicircuits.inc: adjust spacing between the 2 rows of pins to better match the datasheet 2004-04-30 18:55 danmc * lib/smt.inc: clarify a comment 2004-04-29 21:49 danmc * src/: Pcb.ad.in, action.c, file.c, find.c, global.h, macro.h, main.c, parse_y.y, sizedialog.c: Add some DRC checking of silkscreen layers. Currently this check looks for minimum widths of silk lines. Currently not checked are: - silk polygons - silk text - wide silk lines made by overlapping several narrow silk lines 2004-04-29 20:19 danmc * src/find.c: put a string which is repeated several times into a #define and use that macro instead. 2004-04-29 19:50 danmc * src/: autoplace.h, autoroute.h, djopt.h, drill.h, heap.h, intersect.h, netlist.h, output.c, rats.c, resmenu.h, rtree.h, selector.c, vector.h: RCS Id police 2004-04-29 19:09 danmc * src/Makefile.in: regen 2004-04-29 19:05 danmc * src/Makefile.am: minor fixes to get the distcheck target working again. 2004-04-28 23:12 danmc * doc/pcb.texi: add a note about the centroid and bill of materials output. While here add a feature list near the top of the document to help a new user quickly answer the question "what is pcb and what can it do?". 2004-04-28 22:41 danmc * src/resmenu.c: RCS Id and config.h police 2004-04-28 22:34 danmc * src/print.c: When printing to RS-274-X also generate a centroid data file (X-Y data) with the required data to drive a pick and place machine. The centroid of each part is calculated from the center of each pin/pad. The rotation is determined by looking at the angle of pin1 relative to the centroid. In addition, generate a bill of materials file. This lists the part, quantity, and list of reference designators. 2004-04-28 22:21 danmc * src/: res_lex.l, res_parse.y, resmenu.c: fix some 64-bit bugs to get this working on my alpha. Of prime importance, an int isn't big enough to hold a pointer. 2004-04-28 21:31 danmc * src/resource.h: RCS Id police 2004-04-28 18:42 danmc * src/: res_lex.l, res_parse.y: RCS Id police 2004-04-28 18:42 danmc * src/misc.c: put variable declarations at the beginning of functions. Avoids syntax error on gcc-2.95 2004-04-28 17:53 danmc * lib/: amp.inc, bourns.inc, johnstech.inc, minicircuits.inc, panasonic.inc: fix the EXTRACT_END flag 2004-04-28 17:34 danmc * lib/: Makefile.am, Makefile.in, common.m4, cts.inc: add cts library containing CTS series 742/3/4/5/6 resistor packs 2004-04-28 17:34 danmc * lib/: johnstech.inc, smt.inc: fix refdes silk size 2004-04-27 22:42 danmc * lib/: dil.inc, geda.inc: Fix SDIP (shrink DIP) footprints. Patch from Wojciech Kazubski in RFE #929697 slightly modified by me. 2004-04-27 22:17 danmc * lib/panasonic.inc: Correct the spacing between the rows of pads. Also fix one of the pad widths on a footprint which was obviously broken. 2004-04-27 22:09 danmc * lib/smt.inc: hires-ify the COMMON_SMT_DIL_MIL macro. The macro already took input arguments in 1/1000 mil so now we simple only reduce the resolution to 1/100 mil in the output instead of to 1 mil. This also helps the COMMON_SMT_DIL_MM which calls the COMMON_SMT_DIL_MIL macro. 2004-04-27 18:28 danmc * src/tmp.txt: test commit #3 2004-04-27 18:18 danmc * src/tmp.txt: test commit #2 2004-04-27 18:17 danmc * src/tmp.txt: test commit 2004-04-27 15:13 djdelorie * doc/version.texi: add version.texi for non-maintainers 2004-04-27 15:08 djdelorie * src/Makefile.am, src/Makefile.in, src/Pcb.ad.in, src/Pcb.ad.raw, src/Pcb.ad.small, src/action.h, src/dialog.c, src/gather-actions, src/global.h, src/gui.c, src/main.c, src/menu.c, src/menu.h, src/misc.c, src/misc.h, src/pcb-menu.res, src/res_lex.l, src/res_parse.y, src/resmenu.c, src/resmenu.h, src/resource.h, src/set.c, src/sizedialog.c, doc/pcb.texi: add file-driven menus 2004-04-27 14:49 djdelorie * Makefile.in, ylwrap: add ylwrap 2004-04-27 08:56 haceaton * src/autoroute.c: More autorouter improvements, some bug fixes 2004-04-26 09:20 haceaton * src/: autoroute.c, mtspace.c: Significant improvements to autorouting of congested designs 2004-04-25 00:56 haceaton * src/: global.h, rtree.c: Fix rtree memory management bugs 2004-04-19 17:20 haceaton * src/rtree.c: Fix a bug that allocates too much memory to store pointers 2004-04-19 17:20 haceaton * src/: buffer.c, move.c: Fix some bugs with rtree based name handling 2004-04-18 22:19 haceaton * src/: autoroute.c, find.c, rats.c: More autorouter improvements. Improve trace appearance, slightly speed up and allow it to use power planes 2004-04-18 10:12 haceaton * src/: action.c, change.c, copy.c, file.c, insert.c, move.c, polygon.c, polygon.h, remove.c, rotate.c: Fix pin-in-poly bug; because polys can overlap can never check one single polygon. 2004-04-12 00:12 haceaton * src/: djopt.c, autoroute.c: Restore mistakenly lost lines in djopt, and various improvements to auto-router 2004-04-11 11:15 haceaton * src/move.c: Argh, another attempt to properly fix the bug 2004-04-11 11:12 haceaton * src/: djopt.c, move.c: Fixup some errors introduced in last patch 2004-04-09 00:13 haceaton * src/djopt.c: Fix segfault with edge-connector elements (pads on both sides) 2004-04-08 20:25 haceaton * src/: draw.c, insert.c, move.c, output.c: Various bug fixes 2004-03-28 12:45 haceaton * src/: action.c, autoroute.c, global.h, menu.c: Still more improvements to the router, plus can show it's action on screen. 2004-03-27 22:06 haceaton * src/: autoroute.c, box.h, mtspace.c, mtspace.h: More improvements to the autorouter 2004-03-26 15:44 haceaton * src/create.c: Forbid diagonal pads when created externally with an editor 2004-03-25 17:36 haceaton * src/autoroute.c: Some improvements to autorouter - still need to better handle mtspace structures so there is not so much duplicate effort with multiple route styles 2004-03-23 15:28 djdelorie * src/parse_y.y: Provide our own yywrap(), just in case. 2004-03-22 08:12 haceaton * src/Pcb.ad.in: Fix a couple of key binding bugs 2004-03-22 01:27 haceaton * src/find.c: Fix some re-drawing issues after finding connections 2004-03-22 01:26 haceaton * src/autoroute.c: Fix some autoroute bugs; add proper style handling to autorouter 2004-03-20 18:02 haceaton * src/: report.c, rtree.c: Provide better rtree visualization capability 2004-03-20 18:01 haceaton * src/: buffer.c, change.c, create.c, dev_ps.c, draw.c, global.h, misc.c, move.c, move.h, mymem.c, print.c, printpanner.c, remove.c, rotate.c, search.c: Use rtree to search element names; fix postscript paper handling; fix silk names clipped over pins/pads 2004-03-20 13:25 haceaton * src/: rtree.c, rtree.h: Slight optimization of tree construction, plus add means to visualize tree 2004-03-20 12:01 haceaton * src/file.c: Don't use _LOOP macros for writing files in order to preserver ordering so that diff can be effectively used on pcb files 2004-03-18 19:08 danmc * lib/johnstech.inc: increase soldermask relief on mounting pads 2004-03-18 10:35 haceaton * src/: const.h, draw.c, polygon.c: Use sqrt(2)/2 defined in math library when available 2004-03-18 10:34 haceaton * src/rats.c: Handle shorts to unnamed elements and pins 2004-03-18 10:33 haceaton * src/line.c: Forgot to check this in with the _LOOP macro changes 2004-03-18 00:46 haceaton * src/: print.c, dev_ps.c: Add assembly drawing output for postscript 2004-03-16 23:59 haceaton * src/: action.c, autoplace.c, autoroute.c, buffer.c, change.c, copy.c, create.c, crosshair.c, dev_ps.c, dev_rs274x.c, djopt.c, draw.c, drill.c, file.c, find.c, global.h, library.c, macro.h, menu.c, mirror.c, misc.c, move.c, mymem.c, netlist.c, pinout.c, polygon.c, print.c, rats.c, remove.c, report.c, rotate.c, rtree.c, rubberband.c, search.c, select.c, set.c, undo.c: Change _LOOP macros so that gdb can break inside the loop 2004-03-16 19:29 danmc * src/rtree.c: revert last change. Some compilers including gcc-2.95.3 do not like it. ok'ed by harry. 2004-03-14 01:30 haceaton * src/: autoplace.c, intersect.c: Various fixes to autoplacement code 2004-03-14 01:29 haceaton * src/set.c: auto drc bug fix 2004-03-14 01:29 haceaton * src/action.c: Acknowledge placement 2004-03-14 01:26 haceaton * src/: netlist.c, rats.c: Fix memory leaks 2004-03-13 00:51 haceaton * src/rotate.c: corrctly distinguish rubberand rat lines 2004-03-11 17:57 haceaton * src/rtree.c: Remove unnecessary union identifier to clarify code 2004-03-10 17:55 haceaton * src/action.c: Fix polygon insert point bug introduced when reorganizing code 2004-03-09 20:17 danmc * lib/geda.inc: 100 pin QFP packages have 100 pins not 72 2004-03-09 19:10 haceaton * src/error.c: Fix for bad pipe handling under cygwin 2004-03-09 14:51 haceaton * src/draw.c: Minimize rectangle fills 2004-03-09 14:30 haceaton * src/polygon.c: Oops - this fixes the error introduced moving to IsPadInPolygon 2004-03-09 09:01 haceaton * src/crosshair.c: Use SQUARE macro 2004-03-09 08:59 haceaton * src/: action.c, create.c, rats.c, change.c: clean up code to use SQUARE macro and fix via mask update bug 2004-03-09 08:58 haceaton * src/: draw.c, find.c, find.h, polygon.c, print.c, search.c, search.h: Erase silk over solder regions when they cross and display that way on screen 2004-03-08 17:48 haceaton * src/rtree.c: Streamline code for clustering 2004-03-07 21:29 haceaton * src/: Pcb.ad.in, action.c: Added a function { AddRats(Close) bound to shift-n } that selects the shortest unselected ratline and centers the screen view on it. 2004-03-07 20:52 haceaton * src/: crosshair.c, crosshair.h, line.c, line.h: New Auto-DRC line drawing mode implemented. 2004-03-07 13:24 haceaton * src/: draw.c, draw.h: Forgot to checkin draw.h; fix some bugs with really high zoom 2004-03-07 13:20 haceaton * src/find.c: Avoid doubling DRC clearance between non-clearing polygons and square pins/pads 2004-03-06 22:38 haceaton * src/: action.c, buffer.c, change.c, create.c, dialog.c, draw.c, find.c, global.h, move.c, move.h, mymem.c, output.c, printpanner.c, remove.c, rotate.c, rtree.c, search.c, select.c: Fixes for various bugs introduced with the rtree database infrastructure 2004-03-06 22:31 haceaton * src/: menu.c, misc.c: A couple of bug fixes: absolute negative value entries (e.g. =-4) also check the correct zoom level in the menu 2004-03-06 00:55 haceaton * src/select.h: Fix conditional compile variable name 2004-03-05 08:29 haceaton * src/: library.c, mymem.c, output.c, polygon.c: Fixes for several memory leaks and some uninitialized varibable bugs 2004-03-04 21:22 haceaton * src/: file.c, parse_l.l, parse_y.y: Save the DRC settings in the board file 2004-03-04 18:41 haceaton * src/: Pcb.ad.in, dev_ps.c, global.h, printdialog.c, printpanner.c: Fix the postscript print panner bugs introduced with hi-res; also fix the long-standing bug where the default media selection wasn't used 2004-03-04 17:12 danmc * src/select.h: one more regex bug fix noted by Matt Ettus 2004-03-03 23:44 danmc * doc/pcb.texi: document the ToggleVisibility action 2004-03-03 23:38 danmc * src/: action.c, action.h, main.c: Added a new action which will toggle the visibility of layers without clicking on them. Intended to be bound to keys. Patch provided by Matt Ettus in patch #908658. 2004-03-03 23:27 danmc * src/: action.c, menu.c, select.c: enable the regex select stuff. A trial of a regex select of some components seems to work. Prompted by patches provided by Matt Ettus in patch submission 908651. 2004-03-02 21:51 danmc * lib/geda.inc: a HEADER60_2 should have 60 pins not 50 as noted in bug report 900231 2004-03-02 20:49 haceaton * globalconst.h, src/action.c, src/draw.c, src/misc.c, src/move.c, src/report.c: Fixes for element line boundry handling 2004-03-01 11:59 haceaton * src/move.c: Fix for search element bounding box error 2004-03-01 11:19 haceaton * src/: crosshair.c, crosshair.h: These were updated too for the auto-DRC infrastructure 2004-03-01 00:10 haceaton * src/: find.c, action.c, change.c, control.c, control.h, find.h, global.h, misc.c, misc.h, move.c, output.c, search.c, set.c: Some intersection bug fixes and more rtree infrastructure change Also more ground work for auto drc line mode 2004-02-28 22:52 djdelorie * src/Makefile.in: Regenerate. 2004-02-28 18:44 haceaton * src/: action.c, buffer.c, change.c, const.h, create.c, draw.c, find.c, global.h, insert.c, menu.c, misc.c, misc.h, move.c, remove.c, search.c, set.c, undo.c: More usage of rtrees for rats, pins and pads. Some foundation work for a new auto-drc line drawing mode, and some bug fixes. 2004-02-27 17:20 haceaton * src/: buffer.c, create.c, find.c, global.h, menu.c, misc.c, move.c, mymem.c, remove.c, rtree.c, rtree.h: Store pins/pads in rtree 2004-02-27 10:35 haceaton * src/rtree.c: Fixes for some compiler warnings 2004-02-27 01:23 haceaton * src/: clip.c, clip.h: Oh Yeah, the drawing clipping won't work without these files! 2004-02-27 01:16 haceaton * src/: Makefile.am, Makefile.in, action.c, create.c, data.c, data.h, draw.c, global.h, insert.c, insert.h, line.c, line.h, macro.h, misc.c, output.c, parse_y.y, polygon.c, report.c: Fixes for clipping the drawing. Simple saturation could change the geometry when zoomed way in. Also some organizational changes to make the code easier to maintain. 2004-02-26 23:53 danmc * doc/pcb.texi: clarify the pad creation a little 2004-02-26 23:41 haceaton * src/misc.c: Fix for text bounding box error 2004-02-25 15:56 haceaton * src/: action.c, const.h, crosshair.c, menu.c: Add a feature to display design-rule clearance arround prospective line/arc/via 2004-02-25 14:33 haceaton * src/: find.c, search.c: Fix some DRC bugs with square pins 2004-02-19 22:11 danmc * lib/misc.inc: whitespace fix 2004-02-18 22:10 danmc * lib/connector.inc: add a PKG_CONNECTOR_DIL for 2 column headers with DIL pin numbering. This fixes the HEADER*_1 entries in the geda footprint library. 2004-02-17 11:12 haceaton * src/buffer.c: Fix typo that caused bug in via tree handling. 2004-02-17 07:40 danmc * lib/generic.list: remove extra whitespace in generic208_lqfp 2004-02-17 01:27 haceaton * src/: action.c, draw.c, find.c, polygon.c, polygon.h, print.c, report.c, rtree.c: Bug fixes for design rule checking 2004-02-16 22:31 haceaton * src/rtree.c: Make rtree routines reentrant since now they are used that way when drawing during DRC. 2004-02-15 13:04 haceaton * src/: action.c, autoplace.c, autoroute.c, buffer.c, change.c, copy.c, create.c, dev_ps.c, draw.c, file.c, find.c, insert.c, main.c, mirror.c, misc.c, move.c, mtspace.c, mymem.c, pinout.c, polygon.c, print.c, find.h, global.h, macro.h, mirror.h, misc.h, move.h, mymem.h, parse_y.y, polygon.h, rats.c, remove.c, report.c, rotate.c, rotate.h, rtree.c, rtree.h, rubberband.c, search.c, search.h, select.c, undo.c: Large number of changes to keep most of the database in rtrees and avoid linear searches 2004-02-15 11:54 haceaton * src/change.c: Fix minor bug in pad clearance adjustment 2004-02-15 02:46 danmc * src/Makefile.in: regen after adding compat.c/h 2004-02-15 02:46 danmc * src/: Makefile.am, compat.c, compat.h, draw.c, set.c: add a place for putting our own implementation of missing/broken functions. For now add a logf and expf to help solaris. 2004-02-15 02:44 danmc * tools/: Makefile.am, Makefile.in: install MergePCBPS and Merge_dimPBPS 2004-02-15 02:29 danmc * config.h.in, configure: regen after adding logf and expf checks 2004-02-15 02:28 danmc * configure.ac: add checks for logf and expf 2004-02-15 02:12 danmc * src/: create.c, dev_ps.c, dev_rs274x.c, draw.c, file.c, global.h, parse_l.l, parse_y.y: add a way to control the scale factor associated with thermals. This is a global value stored in the .pcb file. The default gives the same behaviour as previous version. By increasing the scale factor, the width of the spokes increases. Eventually it would be nice to make this be per pin/via. 2004-02-15 02:00 danmc * src/report.c: correct the drill diameter in the drill report after the hi-res changes 2004-02-14 18:04 haceaton * src/polygon.c: Fixed syntax error and potential bug 2004-02-14 13:03 haceaton * src/draw.c: Elliminate pre-computing of octagons - there are too many with .01 mil resolution 2004-02-14 11:12 haceaton * src/: find.c, polygon.c: More non-clearing polygon fixes 2004-02-14 10:46 haceaton * src/: buffer.c, dev_rs274x.c, draw.c, macro.h, menu.c, polygon.c, print.c, rubberband.c: Fixed some bugs with non-clearing polygons and made GROUP_LOOP macro 2004-02-14 01:40 haceaton * src/: action.c, crosshair.c, macro.h: Fix arc creation tool when crosshair is on-axis with start point 2004-02-13 21:48 haceaton * src/: report.c, report.h: Report on points and fix some formating 2004-02-13 21:38 haceaton * src/set.c: Fix formatting mismatch 2004-02-13 21:32 haceaton * src/polygon.c: Fixup includes and trivial bug 2004-02-13 21:22 haceaton * src/move.c: fix includes for Message() 2004-02-13 21:21 haceaton * src/menu.c: add left/right buffer mirror menu entry 2004-02-13 17:31 haceaton * src/: Pcb.ad.in, action.c, find.c, global.h, insert.c, main.c, polygon.c, polygon.h, print.c, report.c, set.c, sizedialog.c: More complete and sensible DRC checking 2004-02-13 16:11 haceaton * src/: move.c, search.c: Prevent changing layers of locked objects, find ratlines before other layer objects 2004-02-13 00:54 haceaton * src/: action.c, buffer.c, buffer.h, menu.c: Added function to mirror the buffer 2004-02-13 00:36 haceaton * src/buffer.c: Recalculate arc bounding box when swaping the side 2004-02-12 21:02 haceaton * src/dialog.c: Updated about dialog 2004-02-12 20:57 haceaton * src/rats.c: Use warn color on pins/pads even when netname is known 2004-02-12 20:11 haceaton * src/change.c: Only change masks with size change when they're non-zero to begin with 2004-02-12 20:06 haceaton * src/change.c: Allow +0 change to mask size to make it equal the underlying copper 2004-02-12 19:51 haceaton * src/: action.c, change.c, select.c: Proper handling of all text scalings 2004-02-12 19:13 haceaton * src/: action.c, select.c: Handle element name size changing properly 2004-02-12 10:56 haceaton * src/change.c: Automatically adjust mask size when copper size is changed 2004-02-10 17:13 haceaton * src/print.c: Fixed output bug with persistant thermal changes 2004-02-08 23:08 danmc * tools/Makefile.in: regen after adding Merge_dimPCBPS 2004-02-08 23:07 danmc * tools/Makefile.am: add Merge_dimPCBPS 2004-02-08 23:06 danmc * tools/: MergePCBPS, Merge_dimPCBPS: #/bin/sh -> #!/bin/sh to make these execute correctly. While here, add RCS Id's. 2004-02-06 22:28 haceaton * src/find.c: Find more errors when skipping through DRCs 2004-02-06 16:59 haceaton * src/: action.c, find.c, find.h: Added feature to continue checking drc after first error is found 2004-02-06 16:03 haceaton * src/change.c: Prevent clearance size adjustment from changing joined lines to unjoined 2004-02-06 15:57 haceaton * src/set.c: Fix bug where local reference mark was not erased properly 2004-02-06 15:40 haceaton * src/file.c: Fix bug where loading pcb didn't restore saved view position correctly 2004-02-06 15:30 haceaton * src/: global.h, undo.c: Fixed undo change text size bug introduced with hi-res changes 2004-02-06 11:25 haceaton * src/draw.c: Special drawing mode to examine planes for break-up due to tracks routing through them. 2004-02-06 11:22 haceaton * tools/Merge_dimPCBPS: Add a tool to merge to PCB postscript files where the first one is printed in a light gray color. This is useful for making an assembly drawing where the front tracks are shown in light gray while the silkscreen is solid black. 2004-02-05 23:11 haceaton * src/: macro.h, draw.c, polygon.c, print.c: Make persistant thermal flags for easier changes to polygons 2004-02-05 17:04 haceaton * src/: action.c, const.h, menu.c: Add mode for poly viewing to help spot broken planes 2004-02-05 17:02 haceaton * src/main.c: Fix text scaling intialization 2004-02-05 09:18 haceaton * src/dev_rs274x.c: Fix a couple of gerber bugs introduced with hi-res 2004-02-05 01:25 haceaton * src/polygon.c: Warn on unplated holes piercing polygons 2004-02-05 01:21 haceaton * src/print.c: Don't clear pure-holes in polygons 2004-02-05 01:20 haceaton * src/polygon.c: Fix bug in PIP flags 2004-02-05 01:06 haceaton * src/: dev_rs274x.c, find.c, find.h, print.c: Fixed some gerber hi-res bugs and some complex ground-plane print issues 2004-02-03 23:09 djdelorie * example/libraries/Makefile.in: * Detect re_comp(), regcomp(), and (select.c doesn't use the new HAVE_* yet, this is a prelude to it). * Set -DNDEBUG for all src/* compiles. * Support maintainer mode (--enable-maintainer-mode) (I got tired of having half the world regenerated just because I did a "cvs update") * Detect tgif, if not found pad.{png,eps} just isn't built (what's that for, anyway?) Prebuilt copies of those should be checked in too at some point. 2004-02-03 22:59 djdelorie * Makefile.in, aclocal.m4, config.h.in, configure, configure.ac, README_FILES/Makefile.in, doc/Makefile.am, doc/Makefile.in, example/Makefile.in, lib/Makefile.in, newlib/Makefile.in, newlib/2_pin_thru-hole_packages/Makefile.in, newlib/analog-devices/Makefile.in, newlib/burr-brown/Makefile.in, newlib/connectors/Makefile.in, newlib/crystal/Makefile.in, newlib/cypress/Makefile.in, newlib/electro-optics/Makefile.in, newlib/generic_SMD_packages/Makefile.in, newlib/headers/Makefile.in, newlib/msp430/Makefile.in, newlib/not_vetted_ingo/Makefile.in, newlib/sockets/Makefile.in, newlib/tests/Makefile.in, newlib/toko/Makefile.in, src/Makefile.am, src/Makefile.in, src/icons/Makefile.in, src/script/Makefile.in, tools/Makefile.in, tutorial/Makefile.in: * Detect re_comp(), regcomp(), and (select.c doesn't use the new HAVE_* yet, this is a prelude to it). * Set -DNDEBUG for all src/* compiles. * Support maintainer mode (--enable-maintainer-mode) (I got tired of having half the world regenerated just because I did a "cvs update") * Detect tgif, if not found pad.{png,eps} just isn't built (what's that for, anyway?) Prebuilt copies of those should be checked in too at some point. 2004-02-03 19:53 djdelorie * src/draw.c: Don't assume that an all-ones pixel is white. 2004-02-03 18:28 haceaton * src/menu.c: Fixes for hi-res bugs 2004-02-03 18:10 haceaton * src/print.c: Changes to the fab drawing for improved clarity and allows for a an outline route by naming a layer "outline" or "route" 2004-02-03 00:30 haceaton * src/error.c: Added a line count to Message mechanism 2004-02-02 22:08 danmc * NEWS: note harry's hi-res changes. 2004-02-01 20:03 haceaton * src/: autoroute.c, heap.c, heap.h: More speed-ups for the router 2004-02-01 12:12 haceaton * src/print.c: Change gerber drill files to have .cnc suffix and name the component side output group "front", the solder-side output "back" 2004-02-01 11:28 haceaton * src/: action.c, parse_y.y: A couple of bug fixes for arc handling in hi-res 2004-01-31 10:35 haceaton * src/autoroute.c: More speed-up changes. Limit the intial search in FindIntersecting 2004-01-31 10:33 haceaton * src/rtree.c: Minor comment changes and some tiny tweaks 2004-01-30 22:20 haceaton * src/buffer.c: Fix bug in element name mirroring when elements are created on the solder side 2004-01-30 09:09 haceaton * src/main.c: Fix initial screen/offscreen zoom 2004-01-30 09:09 haceaton * src/polygon.c: Some Hi-res fixes plus elliminat too close to polygon concept 2004-01-29 23:34 haceaton * src/output.c: Fixed the auto-scroll broken when switched to hi-res 2004-01-29 23:20 haceaton * src/rats.c: Fix bug introduced changing to hi-res 2004-01-29 01:46 haceaton * src/: autoroute.c, box.h: More speed ups to the auto-router code. This is only code streamlining, there is no algorithm change 2004-01-27 23:54 haceaton * src/: kdtree.c, kdtree.h: The kdtree has been replaced with rtree which is faster given the way it is used 2004-01-27 23:48 haceaton * src/: rtree.c, rtree.h: rtree for faster rectangle intersection searching 2004-01-27 23:47 haceaton * src/: Makefile.am, Makefile.in, autoplace.c, autoroute.c, mtspace.c: replaced kd-tree with r-tree for faster auto-routing 2004-01-20 11:15 haceaton * src/action.c: Fix for smashing element in place 2004-01-19 17:17 haceaton * src/: autoroute.c, heap.h, kdtree.c, kdtree.h: Fixes for auto-router with hi-res and some speed-ups of its operation 2004-01-19 16:49 haceaton * src/find.c: Speed up polygon/polygon intersection testing. The special case is *all* points inside polygon, not just some points so only one point need be tested 2004-01-19 14:16 haceaton * src/: const.h, data.c, data.h, draw.c, draw.h, file.c, global.h, macro.h, main.c, menu.c, parse_y.y, pinout.c, set.c, set.h: Modifications to support arbitrary zoom ratios 2004-01-17 20:08 haceaton * src/menu.c: Fix for intermediate zoom levels 2004-01-17 20:05 haceaton * globalconst.h, src/Pcb.ad.in, src/data.c, src/draw.c, src/macro.h, src/output.c, src/parse_y.y, src/set.c: Added some intermediate zooms, so now it goes by sqrt(2) 2004-01-17 18:07 haceaton * src/menu.c: Add menu item to auto-route only selected rats 2004-01-17 18:06 haceaton * src/output.c: Increase the minimum size of the panner control 2004-01-17 18:06 haceaton * src/main.c: Fix some default sizes for hi-res when no resource file is available 2004-01-15 15:16 haceaton * src/: action.c, action.h, menu.c: Added support to smash an element in place 2004-01-15 11:17 haceaton * src/: action.c, const.h, menu.c, misc.c, set.c: Added Local reference measurement for line drawing and allow not-overriding the mark position for moves and line-drawing 2004-01-15 09:21 haceaton * src/: Pcb.ad.in, action.c, main.c, set.c, set.h: Fix to keep mode setting and add a function for moving an object by/to numerical coordinates 2004-01-13 22:10 haceaton * src/: Pcb.ad.in, action.c, command.c, misc.c: Tweaks for case-insensitive command arguments, keyboard adjust of grid and fixed a couple of absolute/relative bugs. 2004-01-13 21:24 haceaton * src/misc.c: Turned off debugging messages 2004-01-13 21:23 haceaton * src/: macro.h, misc.c, output.c: Fixes for several solder-side viewing bugs introduced with hi-res changes 2004-01-13 00:00 haceaton * src/djopt.c: Fixed for new definition of mils for savings report 2004-01-12 23:52 haceaton * src/: box.h, mtspace.c: Fix for mtspace coalesce; hi-res requires floats for area computation 2004-01-10 14:38 haceaton * src/: action.c, draw.c, report.c: Fixes for text scaling 2004-01-09 20:23 danmc * src/parse_y.y: One more hi-res buglet. Correct parsing of 'Arc'. Thanks to Bill Wilson for catching this one. 2004-01-09 07:15 danmc * lib/smt.inc: partially undo the last change with respect to quoting. Only quote $2. This keeps the reference designator from being expanded as desired but lets the Description field get expanded as desired. 2004-01-08 00:00 haceaton * Makefile.in, aclocal.m4, configure, doc/Makefile.in, lib/Makefile.in, newlib/Makefile.in, newlib/2_pin_thru-hole_packages/Makefile.in, newlib/analog-devices/Makefile.in, newlib/burr-brown/Makefile.in, newlib/connectors/Makefile.in, newlib/crystal/Makefile.in, newlib/cypress/Makefile.in, newlib/electro-optics/Makefile.in, newlib/generic_SMD_packages/Makefile.in, newlib/headers/Makefile.in, newlib/msp430/Makefile.in, newlib/not_vetted_ingo/Makefile.in, newlib/sockets/Makefile.in, newlib/tests/Makefile.in, newlib/toko/Makefile.in, src/Pcb.ad.in, src/action.c, src/main.c, src/misc.c, src/icons/Makefile.in, src/script/Makefile.in: Fixes for absolute/relative size change. Also added repeat last typed command and fixed a few hi-res bugs. 2004-01-06 18:53 haceaton * src/set.c: Fixed sign display in fractional mil part of crosshair 2004-01-05 20:04 haceaton * src/action.c: Fix for Display(Save|Restore) 2004-01-05 18:41 danmc * src/print.c: fix generation of fab drawing with the high resolution changes 2004-01-05 18:40 danmc * src/dev_rs274x.c: fix a couple of other bugs related to the high res changes. In particular, correct the aperture for the fab drawing and for the outline. Also fix up text output. 2004-01-05 17:23 danmc * lib/johnstech.inc: Convert to a high resolution footprint. Pads are a little more accurate now. 2004-01-05 17:21 danmc * src/dev_rs274x.c: correct the aperture definition output lines and the drill tool definition output lines after the hi-res change. Gerber output should be ok again. 2004-01-05 00:00 haceaton * src/Pcb.ad.in: fixed missing continuation in scroll commands 2004-01-04 20:40 haceaton * configure, configure.ac, globalconst.h, src/Makefile.in, src/Pcb.ad.in, src/action.c, src/action.h, src/autoplace.c, src/autoplace.h, src/autoroute.c, src/autoroute.h, src/box.h, src/buffer.c, src/buffer.h, src/change.c, src/change.h, src/const.h, src/copy.c, src/copy.h, src/create.c, src/create.h, src/crosshair.c, src/crosshair.h, src/data.c, src/data.h, src/dev_ps.c, src/dev_rs274x.c, src/djopt.c, src/djopt.h, src/draw.c, src/drill.h, src/file.c, src/find.c, src/find.h, src/global.h, src/gui.c, src/gui.h, src/heap.h, src/insert.c, src/insert.h, src/intersect.c, src/intersect.h, src/kdtree.c, src/kdtree.h, src/macro.h, src/main.c, src/menu.c, src/mirror.c, src/mirror.h, src/misc.c, src/misc.h, src/move.c, src/move.h, src/mtspace.c, src/mtspace.h, src/netlist.c, src/netlist.h, src/output.c, src/output.h, src/parse_y.y, src/pinout.c, src/polygon.c, src/polygon.h, src/print.c, src/print.h, src/rats.c, src/report.c, src/rotate.c, src/rotate.h, src/rubberband.c, src/search.c, src/search.h, src/set.c, src/set.h, src/sizedialog.c, src/undo.c, src/undo.h, src/vector.h: Many changes to add 0.01 mil resolution 2004-01-02 15:52 haceaton * src/change.c: Display pin/pad number when prompting for name 2004-01-02 00:46 haceaton * src/draw.c: Minor correction to not attempt to write vertical null strings 2004-01-02 00:26 danmc * doc/refcard.tex: add missing RCS Id 2004-01-02 00:00 danmc * src/: autoplace.h, autoroute.h, box.h, djopt.h, drill.h, gui.h, heap.h, intersect.h, kdtree.h, mtspace.h, netlist.h, vector.h, autoplace.c, autoroute.c, djopt.c, gui.c, heap.c, intersect.c, kdtree.c, mtspace.c, netlist.c, rats.c, vector.c: add missing RCS Id 2004-01-01 15:05 danmc * lib/smt.inc: - modify the 2 pad smt base definition to put the origin of the footprint at the common centroid. Useful both for driving pick and place as noted in bug report 716519 and for centering a part on a grid. - while here make sure the $1, $2, and $3 arguments to the various macros are properly quoted. This helps avoid some obscure bugs with generated layouts from gEDA. 2004-01-01 08:30 haceaton * src/draw.c: Font metrics need to be outside TO_DRAW() macros 2004-01-01 02:43 danmc * lib/smt.inc: fix some quoting 2004-01-01 02:42 danmc * lib/amphenol.inc: bump copyright date 2004-01-01 02:42 danmc * lib/amphenol.inc: properly pass down the arguments to the underlying macro for the PKG_AMPHENOL_ARFX123{0,1,2} packages 2003-12-31 23:43 danmc * doc/wishlist.txt: add element versioning and database of good elements 2003-12-31 23:41 danmc * doc/wishlist.txt: add a features wish list. not sure if this is the best place for such a thing, but for now it'll do. 2003-12-31 14:37 danmc * lib/Makefile.in: regen after adding amp library 2003-12-31 14:26 danmc * lib/: Makefile.am, amp.inc, common.m4: add Amp connector library. Currently its populated with the 767054 series of Mictor connectors. 2003-12-31 00:01 haceaton * src/menu.c: Fixed menu selection of metric grids: The C-preprocessor won't change string literals of course. 2003-12-30 22:41 haceaton * src/: Pcb.ad.in, const.h, draw.c, misc.c: Added vertical text support for pinout descriptions 2003-12-30 22:33 danmc * lib/smt.inc: with reverse order numbering in COMMON_SMT_DIL_MIL and COMMON_SMT_DIL_MM, make sure the pin number matches the pin name. 2003-12-30 22:03 danmc * lib/panasonic.inc: fix typo in a comment 2003-12-30 21:57 danmc * lib/: geda.inc, smt.inc: add SC70_3, SC70_4, SC70_5, and SC70_6 footprints (the 3,4,5, and 6 pin SC70 family). 2003-12-30 21:37 danmc * lib/to.inc: rename the SOT23 and SOT323 footprints here to SOT23_CEL and SOT323_CEL to avoid a conflict with the ones defined in the geda library. The "CEL" part reflects that the pin numbering is the one used by CEL which is different from what others seem to use. 2003-12-30 21:32 danmc * lib/Makefile.in: regen after adding panasonic library 2003-12-30 21:30 danmc * lib/: Makefile.am, common.m4, panasonic.inc: Add the panasonic EXB series of chip resistor arrays. 2003-12-30 21:29 danmc * lib/smt.inc: deal with SMT DIL packages with an odd number of pads per side 2003-12-30 20:24 danmc * lib/smt.inc: add an extra argument to COMMON_SMT_DIL_MIL and COMMON_SMT_DIL_MM to allow the pins to go in the reverse order to deal with some non-standard pinouts like the mini-circuits KK81 package. 2003-12-30 20:05 danmc * lib/Makefile.in: regen after adding minicircuits 2003-12-30 20:04 danmc * lib/: Makefile.am, common.m4, minicircuits.inc: add several minicircuits packages 2003-12-30 18:05 danmc * lib/Makefile.in: regen after adding bourns library 2003-12-30 18:04 danmc * lib/: geda.inc, smt.inc: - add a handful of 3 pin SMT EMI filter footprints - add US* family of SMT packages. 2003-12-30 18:02 danmc * lib/connector.inc: add through hole test point footprint. 2003-12-30 17:59 danmc * lib/common.m4: include the bourns library 2003-12-30 17:59 danmc * lib/: amphenol.inc, amphenol.list, amphenol.m4: add some more SMA connectors 2003-12-30 17:58 danmc * lib/: Makefile.am, bourns.inc: add bourns 3224G, 3224J, 3224W, and 3224X trim pots 2003-12-29 23:42 danmc * doc/pcb.texi: add note about the dangers of whitespace in .list files 2003-12-29 23:37 danmc * lib/amphenol.m4: correct capitalization for amphenol_ARFX1229 2003-12-29 23:37 danmc * lib/amphenol.list: remove extra whitespace at end of ARFX1229 line 2003-12-29 23:13 danmc * lib/Makefile.in: regen after adding amphenol library 2003-12-29 23:08 danmc * lib/: Makefile.am, amphenol.inc, amphenol.list, amphenol.m4, common.m4: Add amphenol connectors. Start out with the ARFX1229 SMA connector. 2003-12-29 23:06 danmc * lib/: connector.inc, geda.inc: add MTA100 connectors 2003-12-29 21:18 haceaton * src/: action.c, autoplace.c, buffer.c, change.c, copy.c, create.c, crosshair.c, dev_ps.c, dev_rs274x.c, dialog.c, draw.c, drill.c, file.c, find.c, library.c, menu.c, mirror.c, misc.c, move.c, mymem.c, netlist.c, pinout.c, polygon.c, print.c, rats.c, remove.c, report.c, rotate.c, rubberband.c, search.c, select.c, set.c, undo.c: Ok, this complete the formating changes. Whew! 2003-12-29 18:40 haceaton * src/file.c: Fixed another glitch during format change 2003-12-29 09:24 haceaton * src/find.c: Fixed a polygon/polygon intersection bug where a wrong point index was used 2003-12-29 09:10 haceaton * src/file.c: Restored accidentally deleted line during formating change. 2003-12-28 22:15 haceaton * src/: action.c, autoplace.c, buffer.c, change.c, command.c, control.c, copy.c, create.c, crosshair.c, dev_ps.c, dev_rs274x.c, dialog.c, draw.c, drill.c, error.c, file.c, fileselect.c, find.c, gui.c, insert.c, kdtree.c, lgdialog.c, library.c, log.c, main.c, menu.c, mirror.c, misc.c, move.c, mtspace.c, mymem.c, netlist.c, output.c, pinout.c, polygon.c, print.c, printdialog.c, printpanner.c, rats.c, remove.c, report.c, rotate.c, rubberband.c, search.c, select.c, set.c, sizedialog.c, undo.c, vector.c: Cleaned up coding formating from long-ago indent diaster with _LOOP macros. These should be formating changes only. 2003-12-28 12:16 haceaton * src/: insert.c, polygon.c, remove.c, search.c, search.h, undo.c: fixed polygon undo bugs; speed-up of undo operations 2003-12-26 15:04 djdelorie * src/djopt.c: Use the layer groups to determine which layers are solder and component. Fix bugs in check2 and padcleaner where deleted lines weren't skipped. 2003-12-25 22:33 haceaton * src/djopt.c: added undo capability for trace optimizations 2003-12-25 12:22 haceaton * src/: autoroute.c, copy.c, dev_rs274x.c, draw.c, find.c, macro.h, polygon.c, print.c, rubberband.c, undo.c: using macro LAYER_PTR(n) to go from layer number to pointer. this simplifies the code a little bit 2003-12-25 11:27 haceaton * src/: move.c, remove.c: simplified ObjectMove undo serial number handling 2003-12-24 18:58 haceaton * src/select.c: fixed bug where null F->Pad could be called (e.g. change drill size) 2003-12-22 09:13 haceaton * src/netlist.c: Both ends of an added rat line must have named elements 2003-12-22 00:16 haceaton * src/: find.c, search.c: Fixed various DRC errors with arcs, square pads and square pins 2003-12-21 13:58 haceaton * src/netlist.c: Disallow drawing rat-lines to unnamed elements; fixed a problem with netlist window being doubly disposed. 2003-12-19 22:31 danmc * lib/smt.inc: add -*- m4 -*- 2003-12-16 22:36 danmc * lib/: Makefile.am, Makefile.in, common.m4, gen_list.awk, gen_m4.awk, johnstech.inc: add footprints for Johnstech Evaluation Socket for QFN packages Johnstech Socket Part Numbers 724810 through 724839. Note, the footprint has been checked by hand but not yet verified through fabrication. 2003-11-30 19:30 danmc * configure: regen after -R fix 2003-11-30 19:28 danmc * configure.ac: When trying out the various -R, --rpath, etc. compiler flags, actually try them out instead of just claiming to. Addresses part of bug report 850369 filed by Tom Saunders. 2003-11-28 21:00 haceaton * src/crosshair.c: Allow snap to line end-points and vias when off-grid 2003-11-20 13:55 haceaton * src/dev_rs274x.c: restored bug fixes that got lost, fixed some bugs and cleaned the code a little 2003-11-20 10:43 haceaton * src/dev_rs274x.c: removed #include that accidentally got in on the last commit 2003-11-19 16:58 haceaton * src/: dev_rs274x.c, print.c: Changed print.c and dev_rs274x.c in order to provide negative image ground planes for gerber output when possible. Some fab vendors can't handle or charge extra for composite ground planes which is the motivation for this. Negative image planes are made when (1) There are no lines, arcs, text, or pads on a layer and (2) There is exactly 1 polygon on the layer and (3) All vias/holes/pins pierce the polygon. The polygon is then assumed to consume all of the area and only the thermal reliefs and pin/via clearances are needed. haceaton 11/19/03 2003-11-13 04:18 danmc * doc/Makefile.in: regen 2003-11-13 04:13 danmc * doc/Makefile.am: add rules for creating postscript and png from a tgif drawing. Needed for improved docs. 2003-11-13 04:06 danmc * config.h.in: regen after adding Xpm check 2003-11-13 04:01 danmc * src/print.c: Change how the polarity of the soldermask relief layer is handled. The polarity is not changed but it now correctly works for postscript output as well as gerber output. Previously the postscript output produced white on a white background or black on a black background. This addresses PR 825680 filed by Russ Dill. 2003-11-08 00:12 danmc * configure.ac, configure: use AC_PATH_PROGS to search through a list of candidates for wish 2003-11-07 22:35 danmc * configure, src/Makefile.in, src/script/Makefile.in: regen after moving the pcb script to a subdirectory. 2003-11-07 22:31 danmc * configure.ac, src/Makefile.am, src/pcb.in, src/script/Makefile.am, src/script/pcb.in: move the pcb script to a subdirectory to avoid name conflicts with the Pcb application default file on systems such as cygwin that are not case sensitive. 2003-11-07 22:06 danmc * configure.ac, configure: search for libXpm which is needed on cygwin libXaw 2003-11-07 19:05 danmc * configure.ac, configure: add a few more variants of wish (wish83, cygwish80, etc) to search for 2003-10-15 19:54 danmc * src/dev_rs274x.c: fix two bugs related to gerber file generation. The first bug is triggered when the first aperture used in a file is the same as the last aperture used in the previous file. In this case the aperture selection code is missing from the output file. The second bug is when the first point drawn has its Y coordinate (in PCB coordinates) equal to zero. The output will be at gerber Y coordinate zero which is on the opposite side of the board. Thanks to Gabriel Paubert (paubert at iram dot es) for noting these bugs and supplying a patch. 2003-10-12 23:37 danmc * src/report.c: correct the reporting of soldermask relief for pads and via's. Patch provided by Gabriel Paubert, paubert at iram dot es on the geda-dev mailing list. 2003-10-11 00:43 danmc * src/report.c: show pad names in object report. patch supplied in bug report 787711 by Olof Tangrot. 2003-10-10 23:35 danmc * src/: cmask.grb, cpaste.grb, csilk.grb, pdrill.grb, smask.grb, spaste.grb, ssilk.grb, udrill.grb: remove some output files which should have never been in CVS. 2003-10-02 20:04 danmc * lib/Makefile.in: regen after qfn.inc additions 2003-10-02 20:02 danmc * lib/: Makefile.am, common.m4, geda.inc, qfn.inc: add 60 members of the Quad Flat No-lead (QFN) package family. Based on package drawings downloaded from www.maxim-ic.com and Intersil technical brief TB389.1 "PCB Land Pattern Desugn and Surface Mount Guidelines for QFN (MLFP) Packages". 2003-10-01 07:20 danmc * doc/: Xdefaults.tgif, pad.obj: add a figure to help with describing the pads. Also add an Xresources file needed to convert the tgif drawing to png 2003-09-30 19:50 danmc * doc/pcb.texi: update copyright for last changes 2003-09-30 19:41 danmc * configure, example/Makefile.in, example/libraries/Makefile.in: regen after example/libraries addition 2003-09-30 19:38 danmc * configure.ac, example/Makefile.am: add example/libraries/Makefile 2003-09-30 19:32 danmc * doc/pcb.texi, example/libraries/Makefile.am, example/libraries/example.inc, example/libraries/example.list, example/libraries/example.m4: Add two new chapters to the manual. The first attempts to provide some more documentation about library creation. It includes a complete example of adding footprints using M4 style libraries as well as giving instructions on creating newlib style footprints. The second added chapter shows how to take a design from start to finish using gEDA as the schematic capture and PCB as the layout tool. This chapter still needs work, but early feedback is good and its better than no documentation. 2003-09-02 23:18 djdelorie * src/: dev_ps.c, dev_rs274x.c, draw.c, drill.c, print.c, report.c: Add FAB drawing page. Use thinner traces for larger fonts. 2003-09-02 22:08 danmc * aclocal.m4, configure: regen 2003-09-02 22:06 danmc * acinclude.m4, configure.ac: don't hardcode -lXaw in the FUNCPROTO and related tests. 2003-09-02 21:50 danmc * configure: regen 2003-09-02 21:49 danmc * configure.ac: add a --with-xaw= option that lets you select an alternative to Xaw. For example, --with-xaw=Xaw3d will search for the Xaw3d library. 2003-09-02 20:21 danmc * doc/pcb.texi: add brief section about the trace optimizer. 2003-08-31 19:10 danmc * lib/geda.inc: change 'Square' to 'Rectangular' to the comment for the rectangular QFP section. 2003-08-29 20:26 danmc * lib/: gen_geda_list.awk, gen_geda_m4.awk: remove the lines which tried to copy the source file RCS Id to the generated files. CVS broke this feature by expanding keywords on me. 2003-08-29 20:21 danmc * lib/: geda.list, geda.m4: these files are autogenerated now 2003-08-29 20:17 danmc * lib/: geda.inc, qfpdj.inc: rework the QFP packages fixing several bugs and greatly expanding the footprint database. Patches supplied in bug report 785400 by Wojciech Kazubski. Many thanks for the contribution! 2003-08-29 20:12 danmc * lib/common.m4: add qfpdj.inc to the include list 2003-08-29 20:12 danmc * lib/CreateLibraryContents.sh.in: when given a -I flag, look both there and the current directory for .list files. Needed for building outside the source tree directory. 2003-08-29 20:11 danmc * lib/: Makefile.am, Makefile.in, gen_geda_list.awk, gen_geda_m4.awk: add scripts which autogenerate geda.m4 and geda.list from geda.inc. 2003-08-26 06:48 danmc * lib/: geda.inc, geda.list, geda.m4, plcc.inc: Add 20,28,32 pin PLCC footprints, both unsocketed and socketed (through hole). Provided in bug report 777539 by Troy Jacobson. 2003-08-23 00:41 djdelorie * src/djopt.c: Support however many layers are configured. 2003-08-16 16:01 danmc * doc/pcb.texi: add info-dir entry 2003-08-16 15:52 danmc * newlib/2_pin_thru-hole_packages/Makefile.in: regen 2003-08-16 15:37 danmc * newlib/2_pin_thru-hole_packages/Makefile.am: Makefile.am is not a library component so do not install it as one 2003-08-14 21:07 danmc * README.snapshots: add a note on creating snapshots 2003-08-14 20:42 danmc * doc/pcb.texi: add DJ and myself 2003-08-14 07:01 danmc * lib/: lsi.list, lsi.m4: Remove extra space in one of the pin names in AT90S2313_dil and add missing AT90S4434_dil AT90S8535_dil AT90S8535_plcc. Patch provided in bug report 770829 by Daniel Mooney (dbmk). 2003-08-06 08:10 danmc * lib/texas_inst_voltage_reg.m4: fix parse error on uA7952C. Patch provided in bug report 770829 by Daniel Mooney (dbmk). 2003-08-05 05:38 danmc * lib/texas_inst_amplifier.m4: fix parse errors in TL083 and ua747. Patch provided in bug report 770829 by Daniel Mooney (dbmk). 2003-08-05 05:18 danmc * lib/jerry.m4: fix parse errors on DS1225 and DS1230. Patch provided in bug report 770829 by Daniel Mooney (dbmk). 2003-07-24 22:12 djdelorie * src/djopt.c: second dummy commit 2003-07-24 20:22 djdelorie * src/djopt.c: Dummy commit to test log messages 2003-07-20 15:58 danmc * README.cvs: note that autoconf 2.13 is not new enough and mention how to get the version 2003-07-19 23:04 djdelorie * src/dev_rs274x.c: polygon fills must have a defined aperture also 2003-07-19 22:39 djdelorie * src/: dev_rs274x.c, print.c: Solder mask layers are reliefs and normally are positive prints. Support inverted gerber plots. 2003-07-06 20:22 djdelorie * src/dev_rs274x.c: Properly scale outline and alignment. Add segment to alignment to act as registration. 2003-07-06 12:39 djdelorie * src/report.c: Sort drill report by hole size, list total hole count. 2003-07-02 09:33 djdelorie * src/djopt.c: Fix off-by-one bug in handling bloat. Be more careful about cleaning up traces within pads. 2003-07-01 12:27 djdelorie * src/sizedialog.c: The minimum size of a board should never be more than the current actual size of the board. 2003-06-25 19:48 djdelorie * src/: Pcb.ad.in, change.c: Automatically set CLEARLINEFLAG if the user modifies the clearance. Add keys for changing clearance by selection instead of pointer. 2003-06-22 13:06 djdelorie * src/Makefile.in: Regenerate with djopt.c 2003-06-22 13:02 djdelorie * src/: action.c, const.h, crosshair.c, menu.c: Add orthogonal move feature 2003-06-22 12:51 djdelorie * src/: Pcb.ad.in, action.c, const.h, draw.c, menu.c: Add Thindraw 2003-06-22 00:34 djdelorie * src/: Makefile.am, Pcb.ad.in, djopt.c, djopt.h, main.c, menu.c: Add trace optimizer. 2003-06-13 19:52 danmc * Makefile.in, aclocal.m4, config.h.in, configure, depcomp: add automake/conf output to make it easier for users to build 2003-06-13 19:42 danmc * README_FILES/Makefile.in, doc/Makefile.in, example/Makefile.in, lib/Makefile.in, newlib/2_pin_thru-hole_packages/Makefile.in, newlib/analog-devices/Makefile.in, newlib/burr-brown/Makefile.in, newlib/connectors/Makefile.in, newlib/crystal/Makefile.in, newlib/cypress/Makefile.in, newlib/electro-optics/Makefile.in, newlib/generic_SMD_packages/Makefile.in, newlib/headers/Makefile.in, newlib/Makefile.in, newlib/msp430/Makefile.in, newlib/not_vetted_ingo/Makefile.in, newlib/sockets/Makefile.in, newlib/tests/Makefile.in, newlib/toko/Makefile.in, src/icons/Makefile.in, src/Makefile.in, tools/Makefile.in, tutorial/Makefile.in: add the automake/conf generated files to make building from CVS sources easier for people. 2003-06-13 19:14 danmc * src/error.c: only declare sys_nerr if we're using the sys_errlist interface. This fixes compilation on NetBSD/alpha using gcc-3.3. 2003-06-13 19:10 danmc * src/dev_rs274x.c: remove unused varargs.h header which breaks gcc-3.3 compilation 2003-06-05 06:48 danmc * src/: action.c, menu.c: Allow '=' at the beginning of the zoom exponent to indicate an absolute number rather than a relative number. This lets a value of "=-2" be used to indicate an absolute -2 while "-2" still indicates a relative -2. Also correct the position of the check mark on the zoom menu. Patch from DJ Delorie. 2003-05-26 19:45 danmc * src/: file.c, fileselect.c, misc.c, misc.h: Fix a bug in the way the current working directory is found. This caused the file dialog box to always start in the library tree directory. In addition add a loop in ParseLibraryTree() to allow multiple newlib style directory tree's to be specified in the Xresource. This provides an easy way to have per-user and per-project library directories. These directories may either be specified as an absolute or relative path. Patches provided by Tony (droghedra at users dot sourceforge dot net) in bug report 736010 with minor changes by me. 2003-05-22 17:51 danmc * lib/Makefile.am: add missing rules.inc 2003-05-22 07:31 danmc * src/menu.c: add 2 more levels of zooming to the menu. Inspired by an email from DJ Delorie on the gEDA mailing list. 2003-05-20 20:39 danmc * src/parse_l.l: change yy_current_buffer to YY_CURRENT_BUFFER. This addresses the build \ problem reported in bug 734403 and also agrees with the man page for \ flex-2.5.4.\ \ In addition add a %option yylineno to address part of bug 736010\ where the line number associated with a parse error is incorrectly\ displayed as 1. \ 2003-05-20 07:50 danmc * lib/common.m4: add missing bga.inc and resistor_adjust.inc included. The latter addresses part of bug report 734403. 2003-03-17 06:50 danmc * src/.output.h.swp: remove spurious file which should not have been imported. Noted by Mark Becker. 2003-03-17 06:16 danmc * ...: remove spurious file which should not have been imported. Noted by Mark Becker. 2003-03-04 21:17 danmc * src/error.c: if strerror() is present on our system then use it instead of trying to use sys_errlist. Patch from harry, with the check for strerror from me. 2003-03-04 21:11 danmc * configure.ac: move the strerror test up in the configure process so we don't need to link to the X libraries for the test. 2003-03-04 20:58 danmc * configure.ac: add check for strerror() 2003-02-24 07:18 danmc * src/autoroute.c: when checking for a NULL pointer compare to NULL rather than 0 for enhanced portability. 2003-02-20 21:14 danmc * configure.ac: bump to 1.99o since a 1.99n version was posted to the geda list. We should avoid further updates to this version number until a release. If users want snapshots, they can get them from CVS. 2003-02-20 21:10 danmc * src/kdtree.c: change c++ style comments to c style and remove the use of non-static initializers to allow the SunPRO c compiler to be able to compile this file. 2003-02-20 21:05 danmc * src/autoroute.c: coding style fixes to allow this to be compiled with the SunPRO c compiler. Changes are moving from c++ style comments to c style comments and getting rid of non-static initializers. 2003-02-20 20:40 danmc * README.cvs: - add section on checking out via anoncvs and updating via anoncvs. - point to INSTALL document for what to do afte bootstrapping the auto* tools 2003-02-20 05:26 danmc * doc/: Imakefile, pcb.texi.in, pcb.texi.raw, refcard.tex.in, refcard.tex.raw: remove obsolete files 2003-02-20 05:19 danmc * lib/newlib.tgz: remove obsolete file (the contents live in pcb/newlib/ now 2003-02-20 05:18 danmc * lib/: CreateLibrary.sh.raw, CreateLibraryContents.sh.raw, Imakefile, QueryLibrary.sh.raw: remove obsolete files 2003-02-19 20:00 danmc * src/: CreateSedScript.sh, Imakefile: remove obsolete files 2003-02-19 19:46 danmc * src/: 1.grb, 2.grb, 3.grb, 4.grb, 5.grb: remove unneeded output files 2003-02-19 19:22 danmc * AUTHORS, ..., COPYING, ChangeLog, INSTALL, Makefile.am, NEWS, README, README.cvs, acinclude.m4, autogen.sh, configure.ac, globalconst.h, install-sh, missing, mkinstalldirs, README_FILES/CHANGES, README_FILES/INSTALL, README_FILES/LICENSE, README_FILES/MAILING, README_FILES/Makefile.am, README_FILES/README, README_FILES/Tools, README_FILES/Whats_new_in_2.0, doc/Imakefile, doc/Makefile.am, doc/mdate-sh, doc/pcb.man.in, doc/pcb.man.raw, doc/pcb.texi, doc/pcb.texi.in, doc/pcb.texi.raw, doc/refcard.tex, doc/refcard.tex.in, doc/refcard.tex.raw, doc/texinfo.tex, example/LED.NET, example/LED, example/Makefile.am, example/LED2, lib/CreateLibrary.sh.in, lib/CreateLibrary.sh.raw, lib/CreateLibraryContents.sh.in, lib/CreateLibraryContents.sh.raw, lib/Imakefile, lib/ListLibraryContents.sh, lib/Makefile.am, lib/QueryLibrary.sh.in, lib/QueryLibrary.sh.raw, lib/TTL_74xx_DIL.list, lib/TTL_74xx_DIL.m4, lib/bga.inc, lib/common.m4, lib/connector.inc, lib/connector.list, lib/connector.m4, lib/crystal.list, lib/crystal.m4, lib/dil.inc, lib/geda.inc, lib/geda.list, lib/geda.m4, lib/generic.list, lib/generic.m4, lib/genericsmt.inc, lib/genericsmt.list, lib/genericsmt.m4, lib/gtag.list, lib/gtag.m4, lib/jerry.list, lib/jerry.m4, lib/linear.list, lib/linear.m4, lib/logic.list, lib/logic.m4, lib/lsi.list, lib/lsi.m4, lib/memory.list, lib/memory.m4, lib/misc.inc, lib/newlib.tgz, lib/optical.list, lib/optical.m4, lib/pci.inc, lib/pci.list, lib/pci.m4, lib/plcc.inc, lib/qfp-ui.in, lib/qfp.dat, lib/qfp.inc, lib/qfp2.inc, lib/qfpdj.inc, lib/resistor_0.25W.list, lib/resistor_0.25W.m4, lib/resistor_adjust.inc, lib/resistor_adjust.list, lib/resistor_adjust.m4, lib/resistor_array.list, lib/resistor_array.m4, lib/rules.inc, lib/smt.inc, lib/texas_inst_amplifier.list, lib/texas_inst_amplifier.m4, lib/texas_inst_voltage_reg.list, lib/texas_inst_voltage_reg.m4, lib/to.inc, lib/transistor.list, lib/transistor.m4, lib/zif.inc, newlib/Makefile.am, newlib/2_pin_thru-hole_packages/0.125W_Carbon_Resistor, newlib/2_pin_thru-hole_packages/1W_Carbon_Resistor, newlib/2_pin_thru-hole_packages/CK05_type_Capacitor, newlib/2_pin_thru-hole_packages/CK06_type_capacitor, newlib/2_pin_thru-hole_packages/IRU1015-33CT_3.3V_reg_TO220, newlib/2_pin_thru-hole_packages/Makefile.am, newlib/2_pin_thru-hole_packages/RN55_type_0.1W_Resistor, newlib/2_pin_thru-hole_packages/T1.75_LED, newlib/analog-devices/ADC12138CIMSA, newlib/analog-devices/Makefile.am, newlib/burr-brown/Makefile.am, newlib/burr-brown/OPA340_SOT23-5, newlib/connectors/100_Pin_jack, newlib/connectors/16x1_SMD_jack, newlib/connectors/3terminal_screw_block, newlib/connectors/72pin45degreeSIMMconnector, newlib/connectors/MOLEX_miniFitJr-12pin, newlib/connectors/Makefile.am, newlib/connectors/Power_Jack, newlib/connectors/RightAngleSMA, newlib/connectors/SJ-3523-SMT_3.5mm_stereo_jack, newlib/crystal/CTX169_oscillator, newlib/crystal/Makefile.am, newlib/cypress/Makefile.am, newlib/electro-optics/IRF_optical_switch, newlib/electro-optics/Makefile.am, newlib/generic_SMD_packages/0805_reflow_solder, newlib/generic_SMD_packages/0805_wave_solder, newlib/generic_SMD_packages/1206_reflow_solder, newlib/generic_SMD_packages/Makefile.am, newlib/generic_SMD_packages/SOT-23_Transistor, newlib/headers/0.1_inch_10pin, newlib/headers/0.1_inch_2pin, newlib/headers/2mm_8pin_header, newlib/headers/Makefile.am, newlib/msp430/MSP430F1121, newlib/msp430/MSP430F1121+jtag, newlib/msp430/Makefile.am, newlib/not_vetted_ingo/Makefile.am, newlib/not_vetted_ingo/pc104+.ele, newlib/not_vetted_ingo/pc104.ele, newlib/not_vetted_ingo/pq100.ele, newlib/not_vetted_ingo/pq128.ele, newlib/not_vetted_ingo/pq144.ele, newlib/not_vetted_ingo/pq160.ele, newlib/not_vetted_ingo/pq208.ele, newlib/not_vetted_ingo/pq240.ele, newlib/not_vetted_ingo/pq304.ele, newlib/not_vetted_ingo/pq32.ele, newlib/not_vetted_ingo/pq44.ele, newlib/not_vetted_ingo/smt0402.ele, newlib/not_vetted_ingo/smt0603.ele, newlib/not_vetted_ingo/smt0805.ele, newlib/not_vetted_ingo/smt1206.ele, newlib/not_vetted_ingo/smt1210.ele, newlib/not_vetted_ingo/smt1913.ele, newlib/not_vetted_ingo/smt2416.ele, newlib/sockets/Makefile.am, newlib/tests/14DIP_oval_pad, newlib/tests/Generic_TSOP48_Flash, newlib/tests/MONOBLOCK_large, newlib/tests/Makefile.am, newlib/tests/StrongARM_CPU, newlib/tests/TK11950, newlib/tests/TO99fromLED, newlib/tests/UART, newlib/tests/monoblock_small, newlib/toko/Makefile.am, src/smask.grb, src/.output.h.swp, src/1.grb, src/2.grb, src/3.grb, src/4.grb, src/5.grb, src/CreateSedScript.sh, src/Imakefile, src/Makefile.am, src/Pcb.ad.in, src/Pcb.ad.raw, src/Pcb.ad.small, src/action.c, src/action.h, src/autoplace.c, src/autoplace.h, src/autoroute.c, src/autoroute.h, src/box.h, src/buffer.c, src/buffer.h, src/change.c, src/change.h, src/check_icon.data, src/cmask.grb, src/set.h, src/command.c, src/command.h, src/const.h, src/control.c, src/control.h, src/copy.c, src/copy.h, src/cpaste.grb, src/create.c, src/create.h, src/crosshair.c, src/crosshair.h, src/csilk.grb, src/data.c, src/data.h, src/default_font, src/dev_ps.c, src/dev_ps.h, src/dev_rs274x.c, src/dev_rs274x.h, src/dialog.c, src/dialog.h, src/draw.c, src/draw.h, src/drill.c, src/drill.h, src/error.c, src/error.h, src/file.c, src/file.h, src/fileselect.c, src/fileselect.h, src/find.c, src/find.h, src/global.h, src/gui.c, src/gui.h, src/heap.c, src/heap.h, src/icon.data, src/insert.c, src/insert.h, src/intersect.c, src/intersect.h, src/kdtree.c, src/kdtree.h, src/lgdialog.c, src/lgdialog.h, src/library.c, src/library.h, src/log.c, src/log.h, src/macro.h, src/main.c, src/menu.c, src/menu.h, src/mirror.c, src/mirror.h, src/misc.c, src/misc.h, src/mode_icon.data, src/move.c, src/move.h, src/mtspace.c, src/mtspace.h, src/mymem.c, src/mymem.h, src/netlist.c, src/netlist.h, src/output.c, src/output.h, src/parse_l.h, src/parse_l.l, src/parse_y.y, src/pcb.in, src/pcbtest.sh.in, src/pdrill.grb, src/pinout.c, src/pinout.h, src/polygon.c, src/polygon.h, src/print.c, src/print.h, src/printdialog.c, src/printdialog.h, src/printpanner.c, src/printpanner.h, src/rats.c, src/rats.h, src/remove.c, src/remove.h, src/report.c, src/report.h, src/rotate.c, src/rotate.h, src/rubberband.c, src/rubberband.h, src/search.c, src/search.h, src/select.c, src/select.h, src/selector.c, src/selector.h, src/set.c, src/sizedialog.c, src/sizedialog.h, src/spaste.grb, src/ssilk.grb, src/udrill.grb, src/undo.c, src/undo.h, src/vector.c, src/vector.h, src/icons/Makefile.am, src/icons/hand.dat, src/icons/hcurs.dat, src/icons/lcurs.dat, src/icons/lock.dat, tools/Makefile.am, tools/MergePCBPS, tools/PCB2HPGL, tools/apctools.zip, tools/gerbertotk.c, tools/pcb2ncap.tgz, tools/tgo2pcb.tcl, tutorial/Makefile.am, tutorial/tut1.pcb: Initial revision 2003-02-19 19:22 danmc * AUTHORS, ..., COPYING, ChangeLog, INSTALL, Makefile.am, NEWS, README, README.cvs, acinclude.m4, autogen.sh, configure.ac, globalconst.h, install-sh, missing, mkinstalldirs, README_FILES/CHANGES, README_FILES/INSTALL, README_FILES/LICENSE, README_FILES/MAILING, README_FILES/Makefile.am, README_FILES/README, README_FILES/Tools, README_FILES/Whats_new_in_2.0, doc/Imakefile, doc/Makefile.am, doc/mdate-sh, doc/pcb.man.in, doc/pcb.man.raw, doc/pcb.texi, doc/pcb.texi.in, doc/pcb.texi.raw, doc/refcard.tex, doc/refcard.tex.in, doc/refcard.tex.raw, doc/texinfo.tex, example/LED.NET, example/LED, example/Makefile.am, example/LED2, lib/CreateLibrary.sh.in, lib/CreateLibrary.sh.raw, lib/CreateLibraryContents.sh.in, lib/CreateLibraryContents.sh.raw, lib/Imakefile, lib/ListLibraryContents.sh, lib/Makefile.am, lib/QueryLibrary.sh.in, lib/QueryLibrary.sh.raw, lib/TTL_74xx_DIL.list, lib/TTL_74xx_DIL.m4, lib/bga.inc, lib/common.m4, lib/connector.inc, lib/connector.list, lib/connector.m4, lib/crystal.list, lib/crystal.m4, lib/dil.inc, lib/geda.inc, lib/geda.list, lib/geda.m4, lib/generic.list, lib/generic.m4, lib/genericsmt.inc, lib/genericsmt.list, lib/genericsmt.m4, lib/gtag.list, lib/gtag.m4, lib/jerry.list, lib/jerry.m4, lib/linear.list, lib/linear.m4, lib/logic.list, lib/logic.m4, lib/lsi.list, lib/lsi.m4, lib/memory.list, lib/memory.m4, lib/misc.inc, lib/newlib.tgz, lib/optical.list, lib/optical.m4, lib/pci.inc, lib/pci.list, lib/pci.m4, lib/plcc.inc, lib/qfp-ui.in, lib/qfp.dat, lib/qfp.inc, lib/qfp2.inc, lib/qfpdj.inc, lib/resistor_0.25W.list, lib/resistor_0.25W.m4, lib/resistor_adjust.inc, lib/resistor_adjust.list, lib/resistor_adjust.m4, lib/resistor_array.list, lib/resistor_array.m4, lib/rules.inc, lib/smt.inc, lib/texas_inst_amplifier.list, lib/texas_inst_amplifier.m4, lib/texas_inst_voltage_reg.list, lib/texas_inst_voltage_reg.m4, lib/to.inc, lib/transistor.list, lib/transistor.m4, lib/zif.inc, newlib/Makefile.am, newlib/2_pin_thru-hole_packages/0.125W_Carbon_Resistor, newlib/2_pin_thru-hole_packages/1W_Carbon_Resistor, newlib/2_pin_thru-hole_packages/CK05_type_Capacitor, newlib/2_pin_thru-hole_packages/CK06_type_capacitor, newlib/2_pin_thru-hole_packages/IRU1015-33CT_3.3V_reg_TO220, newlib/2_pin_thru-hole_packages/Makefile.am, newlib/2_pin_thru-hole_packages/RN55_type_0.1W_Resistor, newlib/2_pin_thru-hole_packages/T1.75_LED, newlib/analog-devices/ADC12138CIMSA, newlib/analog-devices/Makefile.am, newlib/burr-brown/Makefile.am, newlib/burr-brown/OPA340_SOT23-5, newlib/connectors/100_Pin_jack, newlib/connectors/16x1_SMD_jack, newlib/connectors/3terminal_screw_block, newlib/connectors/72pin45degreeSIMMconnector, newlib/connectors/MOLEX_miniFitJr-12pin, newlib/connectors/Makefile.am, newlib/connectors/Power_Jack, newlib/connectors/RightAngleSMA, newlib/connectors/SJ-3523-SMT_3.5mm_stereo_jack, newlib/crystal/CTX169_oscillator, newlib/crystal/Makefile.am, newlib/cypress/Makefile.am, newlib/electro-optics/IRF_optical_switch, newlib/electro-optics/Makefile.am, newlib/generic_SMD_packages/0805_reflow_solder, newlib/generic_SMD_packages/0805_wave_solder, newlib/generic_SMD_packages/1206_reflow_solder, newlib/generic_SMD_packages/Makefile.am, newlib/generic_SMD_packages/SOT-23_Transistor, newlib/headers/0.1_inch_10pin, newlib/headers/0.1_inch_2pin, newlib/headers/2mm_8pin_header, newlib/headers/Makefile.am, newlib/msp430/MSP430F1121, newlib/msp430/MSP430F1121+jtag, newlib/msp430/Makefile.am, newlib/not_vetted_ingo/Makefile.am, newlib/not_vetted_ingo/pc104+.ele, newlib/not_vetted_ingo/pc104.ele, newlib/not_vetted_ingo/pq100.ele, newlib/not_vetted_ingo/pq128.ele, newlib/not_vetted_ingo/pq144.ele, newlib/not_vetted_ingo/pq160.ele, newlib/not_vetted_ingo/pq208.ele, newlib/not_vetted_ingo/pq240.ele, newlib/not_vetted_ingo/pq304.ele, newlib/not_vetted_ingo/pq32.ele, newlib/not_vetted_ingo/pq44.ele, newlib/not_vetted_ingo/smt0402.ele, newlib/not_vetted_ingo/smt0603.ele, newlib/not_vetted_ingo/smt0805.ele, newlib/not_vetted_ingo/smt1206.ele, newlib/not_vetted_ingo/smt1210.ele, newlib/not_vetted_ingo/smt1913.ele, newlib/not_vetted_ingo/smt2416.ele, newlib/sockets/Makefile.am, newlib/tests/14DIP_oval_pad, newlib/tests/Generic_TSOP48_Flash, newlib/tests/MONOBLOCK_large, newlib/tests/Makefile.am, newlib/tests/StrongARM_CPU, newlib/tests/TK11950, newlib/tests/TO99fromLED, newlib/tests/UART, newlib/tests/monoblock_small, newlib/toko/Makefile.am, src/smask.grb, src/.output.h.swp, src/1.grb, src/2.grb, src/3.grb, src/4.grb, src/5.grb, src/CreateSedScript.sh, src/Imakefile, src/Makefile.am, src/Pcb.ad.in, src/Pcb.ad.raw, src/Pcb.ad.small, src/action.c, src/action.h, src/autoplace.c, src/autoplace.h, src/autoroute.c, src/autoroute.h, src/box.h, src/buffer.c, src/buffer.h, src/change.c, src/change.h, src/check_icon.data, src/cmask.grb, src/set.h, src/command.c, src/command.h, src/const.h, src/control.c, src/control.h, src/copy.c, src/copy.h, src/cpaste.grb, src/create.c, src/create.h, src/crosshair.c, src/crosshair.h, src/csilk.grb, src/data.c, src/data.h, src/default_font, src/dev_ps.c, src/dev_ps.h, src/dev_rs274x.c, src/dev_rs274x.h, src/dialog.c, src/dialog.h, src/draw.c, src/draw.h, src/drill.c, src/drill.h, src/error.c, src/error.h, src/file.c, src/file.h, src/fileselect.c, src/fileselect.h, src/find.c, src/find.h, src/global.h, src/gui.c, src/gui.h, src/heap.c, src/heap.h, src/icon.data, src/insert.c, src/insert.h, src/intersect.c, src/intersect.h, src/kdtree.c, src/kdtree.h, src/lgdialog.c, src/lgdialog.h, src/library.c, src/library.h, src/log.c, src/log.h, src/macro.h, src/main.c, src/menu.c, src/menu.h, src/mirror.c, src/mirror.h, src/misc.c, src/misc.h, src/mode_icon.data, src/move.c, src/move.h, src/mtspace.c, src/mtspace.h, src/mymem.c, src/mymem.h, src/netlist.c, src/netlist.h, src/output.c, src/output.h, src/parse_l.h, src/parse_l.l, src/parse_y.y, src/pcb.in, src/pcbtest.sh.in, src/pdrill.grb, src/pinout.c, src/pinout.h, src/polygon.c, src/polygon.h, src/print.c, src/print.h, src/printdialog.c, src/printdialog.h, src/printpanner.c, src/printpanner.h, src/rats.c, src/rats.h, src/remove.c, src/remove.h, src/report.c, src/report.h, src/rotate.c, src/rotate.h, src/rubberband.c, src/rubberband.h, src/search.c, src/search.h, src/select.c, src/select.h, src/selector.c, src/selector.h, src/set.c, src/sizedialog.c, src/sizedialog.h, src/spaste.grb, src/ssilk.grb, src/udrill.grb, src/undo.c, src/undo.h, src/vector.c, src/vector.h, src/icons/Makefile.am, src/icons/hand.dat, src/icons/hcurs.dat, src/icons/lcurs.dat, src/icons/lock.dat, tools/Makefile.am, tools/MergePCBPS, tools/PCB2HPGL, tools/apctools.zip, tools/gerbertotk.c, tools/pcb2ncap.tgz, tools/tgo2pcb.tcl, tutorial/Makefile.am, tutorial/tut1.pcb: import pcb sources (automake version) from my private CVS sources. This matches the sources with the 'sourceforge' tag on my private CVS.