Mailing-List: contact cygwin-help@cygwin.com; run by ezmlm List-Subscribe: List-Archive: List-Post: List-Help: , Sender: cygwin-owner@cygwin.com Mail-Followup-To: cygwin@cygwin.com Delivered-To: mailing list cygwin@cygwin.com Delivered-To: corinna-cygwin@cygwin.com Date: Fri, 18 Mar 2005 10:24:12 +0800 From: "twomol" To: "cygwin@cygwin.com" Cc: "corinna-cygwin" Subject: Re: Under cygwin(winxp), I can't access the com1(com2) Mime-Version: 1.0 Content-Type: text/plain; charset="gb2312" Message-Id: <20050318021503.TKHL11968.fep2.bj1860.net@bit> Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from base64 to 8bit by delorie.com id j2I2Lk4A015555 Corinna Vinschen,hello£¡ ======= 2005-03-17 18:04:22 wrote£º======= >On Mar 16 12:57, twomol wrote: >> corinna-cygwin??hello?? >> >> >> >It allows to use /dev/com1. That will work, too. Only the default >> >setting of com1 is bogus. >> Thank you very much. >> May be I didn't express my question clearly.I want to know is there any way to change the com1 to /dev/com1(/dev/ttyS0) through file-->target settings-->port on insight ? > >Yes. Use the pull down menu. It offers /dev/com1. Thank you. Really? But there is only com1 and com2 on my computer. My insight version is 5.3. I just built one of version 6.1, there are still only com1 and com2. Is this configurable by the configure script? Now I use this method : open the console and type : set remote baud xxxx target remote /dev/com1 load It works ,but I feel it's not very convenient. > > >Corinna > >-- >Corinna Vinschen Please, send mails regarding Cygwin to >Cygwin Project Co-Leader mailto:cygwin@cygwin.com >Red Hat, Inc. > = = = = = = = = = = = = = = = = = = = = Regards ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡twomol ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡twomol@bj1860.net ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2005-03-18