Mailing-List: contact cygwin-help@cygwin.com; run by ezmlm
List-Subscribe: <mailto:cygwin-subscribe@cygwin.com>
List-Archive: <http://sourceware.org/ml/cygwin/>
List-Post: <mailto:cygwin@cygwin.com>
List-Help: <mailto:cygwin-help@cygwin.com>, <http://sourceware.org/ml/#faqs>
Sender: cygwin-owner@cygwin.com
Mail-Followup-To: cygwin@cygwin.com
Delivered-To: mailing list cygwin@cygwin.com
Date: Wed, 16 Mar 2005 12:57:13 +0800
From: "twomol" <twomol@bj1860.net>
To: "corinna-cygwin" <corinna-cygwin@cygwin.com>
Cc: "cygwin" <cygwin@cygwin.com>
Subject: Re: Under cygwin(winxp), I can't access the com1(com2)
Mime-Version: 1.0
Content-Type: text/plain; charset="gb2312"
Message-Id: <20050316044513.SFMG11968.fep2.bj1860.net@bit>
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from base64 to 8bit by delorie.com id j2G4oER7017761

corinna-cygwin£¬hello£¡

	
>It allows to use /dev/com1.  That will work, too.  Only the default
>setting of com1 is bogus.
Thank you very much. 
May be I didn't express my question clearly.I want to know is there any way to change the com1 to /dev/com1(/dev/ttyS0) through  file-->target settings-->port on insight ?



¡¡¡¡¡¡¡¡¡¡       Regards
 				

¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡twomol
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡twomol@bj1860.net
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2005-03-16