X-Authentication-Warning:	delorie.com: mail set sender to geda-help-bounces using -f
X-Recipient:	geda-help AT delorie DOT com
Message-ID:	<53AAC15C.6000901@philippklostermann.de>
Date:	Wed, 25 Jun 2014 14:32:28 +0200
From:	Philipp Klostermann <geda AT philippklostermann DOT de>
User-Agent:	Mozilla/5.0 (Windows NT 5.1; rv:24.0) Gecko/20100101 Thunderbird/24.6.0
MIME-Version:	1.0
To:	geda-help AT delorie DOT com
Subject:	Re: [geda-help] gsch2pcb or gnetlist -g gsch2pcb fails to generate
	initial pcb
References:	<53A1A7F1 DOT 7030600 AT philippklostermann DOT de>
In-Reply-To:	<53A1A7F1.7030600@philippklostermann.de>
Reply-To:	geda-help AT delorie DOT com

Thanks to Vladimir for the "paths to m4 files"-patch.
Unfortunately, this doesn't solve my problem.
I have a very simple demonstration project with one resistor as
file-element and one connector as m4-element.

symtest.gsch2pcb:
output-name symtest
schematics symtest-page1.sch

symtest-page1.sch:
v 20140308 2
C 43600 57900 1 0 0 resistor-2.sym
{
T 44000 58250 5 10 0 0 0 0 1
device=RESISTOR
T 43800 58100 5 10 1 1 0 0 1
refdes=R1
T 43800 57700 5 10 1 0 0 0 1
footprint=R025
}
N 44500 58000 44700 58000 4
C 41600 56000 1 0 0 connector8-1.sym
{
T 41700 59200 5 10 0 0 0 0 1
device=CONNECTOR_8
T 41700 58600 5 10 1 1 0 0 1
refdes=CONN1
T 41300 55700 5 10 1 0 0 0 1
footprint=CONNECTOR 2 4
}
N 43300 58300 44700 58300 4
N 43600 58000 43300 58000 4
N 44700 58300 44700 58000 4

I have a gsch2pcb-generated gnet-gsch2pcb-tmp.scm with the following
contents:
(define gsch2pcb:pcb-m4-dir "/usr/local/share/pcb/m4")
(define gsch2pcb:use-m4 #t)

This is what happens, when I call gnetlist (like gsch2pcb does):

phil AT albus:~/gaf-neu/symtest$ gnetlist -g gsch2pcb -o symtest.pcb -m
gnet-gsch2pcb-tmp.scm symtest-page1.sch
Loading schematic [/home/phil/gaf-neu/symtest/symtest-page1.sch]
=====================================================
gsch2pcb backend configuration:

   ----------------------------------------
   Variables which may be changed in gafrc:
   ----------------------------------------
   gsch2pcb:pcb-m4-command:    "/usr/bin/m4"
   gsch2pcb:pcb-m4-dir:        "/usr/local/share/pcb/m4"
   gsch2pcb:pcb-m4-path:       ("$HOME/.pcb" ".")
   gsch2pcb:m4-files:          ""

   ---------------------------------------------------
   Variables which may be changed in the project file:
   ---------------------------------------------------
   gsch2pcb:use-m4:            yes

   ----------------
   M4 command line:
   ----------------
   /usr/bin/m4 -d -I/usr/local/share/pcb/m4 -I$HOME/.pcb -I.
/usr/local/share/pcb/m4/common.m4 -

=====================================================
Using the m4 processor for pcb footprints
Backtrace:
In current input:
   1: 0* [gsch2pcb "symtest.pcb"]
In /usr/local/share/gEDA/scheme/gnet-gsch2pcb.scm:
 256: 1  (begin (set-current-output-port #) (gsch2pcb:write-top-header) ...)
 293: 2* (if gsch2pcb:use-m4 (let* # # # ...) (begin # #))
 295: 3  (let* (# # #) (message "Using the m4 processor for pcb footprints
") ...)
 296: 4* [apply #<procedure gsch2pcb:open-io-pipe #> #]
In unknown file:
   ?: 5  [gsch2pcb:open-io-pipe "/usr/bin/m4" "-d" ...]
In /usr/local/share/gEDA/scheme/gnet-gsch2pcb.scm:
   ...
 186: 6  (begin (ensure-batch-mode!) (let (# # #) (port-for-each #) (if
# #) ...))
 188: 7* (ensure-batch-mode!)

/usr/local/share/gEDA/scheme/gnet-gsch2pcb.scm:188:10: In expression
(ensure-batch-mode!):
/usr/local/share/gEDA/scheme/gnet-gsch2pcb.scm:188:10: Unbound variable:
ensure-batch-mode!
phil AT albus:~/gaf-neu/symtest$

Can you help me?

- Raw text -