X-Authentication-Warning:	delorie.com: mail set sender to djgpp-bounces using -f
From:	Andrew Cottrell <andspamtrap DOT aty DOT exemail DOT doty DOT com DOT doty DOT au AT unknown DOT addr>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: how can i use importb && outportb to control the series port com 1 ?
Date:	Sun, 03 Oct 2004 19:12:49 +1000
Organization:	HOME
Message-ID:	<aagvl01714ov3qp0hqeflbk6cm24363vt2@4ax.com>
References:	<BAY16-F38jlqzUrIz8U00003ed2 AT hotmail DOT com>
X-Newsreader:	Forte Agent 2.0/32.652
MIME-Version:	1.0
Lines:	16
NNTP-Posting-Host:	220.233.15.233
X-Trace:	1096786388 un-2park-reader-02.sydney.pipenetworks.com.au 3603 220.233.15.233:4007
X-Complaints-To:	Abuse, including message IDs to abuse AT pipenetworks DOT com
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

>i woul like to get and to send information by the port com 1, how can i do ?

Have a look in  the V2TK diretory for serial comms libraries. 

If you want to do it yourself then you WILL need to look a the specs
for a number of UARTS as documented in the various comms libs in order
to take care of the missing / additional registers for the varius
uarts.

Watch the speed you are using and if you are polling or intterupt
driven RX/TX as these can make a big difference.

Good luck. If you get stuck then goto www.delorie.com and search the
past newgroup archive for info.

Andrew

- Raw text -