X-Authentication-Warning:	delorie.com: mail set sender to djgpp-bounces using -f
X-Trace-PostClient-IP:	68.147.131.211
From:	Brian Inglis <Brian DOT Inglis AT SystematicSw DOT Invalid>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: cwsdpmi on Windows
Organization:	Systematic Software
Message-ID:	<17mqh0h1keeu0msh6k92spv4cdv0ssifv5@4ax.com>
References:	<1092438343 DOT 550905 AT proxy2 DOT srv DOT ualberta DOT ca>
X-Newsreader:	Forte Agent 1.93/32.576 English (American)
MIME-Version:	1.0
Lines:	23
Date:	Sat, 14 Aug 2004 00:16:03 GMT
NNTP-Posting-Host:	24.71.223.147
X-Complaints-To:	abuse AT shaw DOT ca
X-Trace:	pd7tw2no 1092442563 24.71.223.147 (Fri, 13 Aug 2004 18:16:03 MDT)
NNTP-Posting-Date:	Fri, 13 Aug 2004 18:16:03 MDT
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

On Fri, 13 Aug 2004 17:06:54 -0600 in comp.os.msdos.djgpp, "John
Hanley" <jdhanley AT telusplanet DOT net> wrote:

>I was wondering if cwsdpmi needs to be present when running an executable on
>DOS under Windows?  I developed the program on PC-DOS 6.3.
>
>Also, will EMM386 interfere at all with cwsdpmi?  And I assume HIMEM.SYS
>should be set.
>
>I am not too certain of the overall differences between DOS and DOS under
>Windows.

You shouldn't need anything, as long as you are running in a DOS VM
under Windows, DPMI 0.9 is automatically supported by Windows. 

To run under standalone DOS without Windows running, you need a DPMI
memory manager, and whatever that memory manager requires. 

-- 
Thanks. Take care, Brian Inglis 	Calgary, Alberta, Canada

Brian DOT Inglis AT CSi DOT com 	(Brian dot Inglis at SystematicSw dot ab dot ca)
    fake address		use address above to reply

- Raw text -