From:	"Mark Usher" <marku AT magnet DOT at>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: Writing directly to video RAM
Date:	Thu, 13 May 1999 18:08:22 +0200
Organization:	Telenor magnet GmbH
Message-ID:	<7heta5$ebk$1@orudios.magnet.at>
References:	<7hegr8$8q6$1 AT orudios DOT magnet DOT at> <373ad5f6 DOT 24447073 AT newsserver DOT cc DOT monash DOT edu DOT au>
NNTP-Posting-Host:	n095p027.dipool.highway.telekom.at
X-Trace:	orudios.magnet.at 926611589 14708 195.3.75.219 (13 May 1999 16:06:29 GMT)
X-Complaints-To:	abuse AT magnet DOT at
NNTP-Posting-Date:	13 May 1999 16:06:29 GMT
X-Priority:	3
X-MSMail-Priority:	Normal
X-Newsreader:	Microsoft Outlook Express 5.00.2013.600
X-MimeOLE:	Produced By Microsoft MimeOLE V5.00.2013.600
Lines:	15
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

> The offset should be 0xA0000, not 0xA000. You have given a segment
> address; the offset from _dos_ds of real-mode segment 0xA000 is
> 0xA0000.
Didn't work either.

Thanks though for the ScreenPutChar() tip.
That works beautifully. I needed a direct poke to the screen so that I could
check that an interrupt routine was working correctly.

Many thanks.

Mark

- Raw text -