www.delorie.com/gnu/docs/hp2xx/hp2xxinf_32.html

search

	Buy GNU books!

HP2XX, A HP-GL Converter

B.2 Size controls

`--aspectfactor (-a) float'

Aspect factor. Valid: float > 0.0. Use float > 1.0 for landscape and float < 1.0 for portrait deformations. Default: float = 1.0

`--height (-h) float'

(Upper limit of) height of picture in mm. Default: float=200.0

`--width (-w) float'

(Upper limit of) width of picture in mm. Default: float=200.0

`--x0 (-x) float'

Pre-set left limit of HP-GL coordinate range to float (rarely used).

`--x1 (-X) float'

Pre-set right limit of HP-GL coordinate range to float (rarely used).

`--y0 (-y) float'

Pre-set lower limit of HP-GL coordinate range to float (rarely used).

`--y1 (-Y) float'

Pre-set upper limit of HP-GL coordinate range to float (rarely used).

`--zengange (-z float'

This option is only relevant for CNC G-code generation (` -m nc', where it sets the working depth of the tool.

`--zretract (-Z float'

This option is only relevant for CNC G-code generation (` -m nc', where it sets the retraction level of the tool.

`--truesize (-t)'

Ignore options `-a -h -w' (aspect factor, height, width). Size information will come from the HP-GL intrinsic data. WARNING: Avoid using option `-r' (rotate) as it works on top of HP-GL and thus will distort the detected HP-GL sizes.