Category: <b>memory management</b>
<br>Flags: available only in protected mode<p>
<pre><b>INT 2C - Cloaking - SET PASSALONG ADDRESS</b>

	AX = 0009h
	DX:EBX = new value for passalong address (see <a href=../../it/58/25.html>#02558</a>)
Return: CF clear
Notes:	when an INT 2C instruction is executed in V86 mode, the Cloaking host
	  calls the passalong address.	The handler should check whether the
	  upcall is of interest to it, and if not it should jump to the old
	  passalong address (retrieved with AX=0008h before the handler was
	  installed).  The final handler should return with CF clear to cause
	  the interrupt to be reflected back to V86 mode if none of the
	  passalong handlers is triggered
	this function was first introduced with RM386 (RAM-MAN/386) v6.00
SeeAlso: AX=0008h,AX=002Dh,INT 2C"PASSALONG CHAIN"

</pre>