INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - END CRITICAL SECTION
AH = 0Fh
Return: CF clear if successful
CF set on error
AL = error code
Range: INT 4C to INT FB, selected by configuration
Note: the Beame&Whiteside TCP/IP protocol stack uses two consecutive
interrupts (62h and 63h by default); the BW-NFS client uses a third
consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=0Eh"ETHDEV",AH=10h"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP"
SeeAlso: INT 63/AH=03h"BW-TCP",INT 63/AH=24h"BW-TCP",INT 64/AH=01h"BW-NFS"