INT 4B - Common Access Method SCSI interface (draft revision 1.9)

	ES:DI -> CAM Control Block (see #03229 at INT 4F/AX=8100h)
InstallCheck:	test for the string "SCSI_CAM" eight bytes past the INT 4Bh
	  handler
Notes:	the CAM committee moved the interface to INT 4F after revision 1.9
	  to avoid conflicting with the IBM SCSI interface and the Virtual
	  DMA specification
	the only driver to date reported to use the CAM interface on INT 4B
	  instead of INT 4F is from Future Domain (which has drivers for CAM
	  on either interrupt)
SeeAlso: INT 4F/AX=8100h
Index:	installation check;Common Access Method SCSI interface