INT 7A - Novell NetWare - LOW-LEVEL API - Notes

Note:	this interrupt is used for IPX/SPX access in NetWare versions through
	  2.0a; in later versions, you should use INT 2F/AX=7A00h to get an
	  entry point even though INT 7A still exists.	For both INT 7A and
	  the FAR entry point, BX contains the function number; IPX is
	  sometimes called internally with BX bit 15 set, which causes the
	  handler to bypass some initial checks and an optional call to the
	  IPX Windows support handler set with INT 2F/AX=7AFFh/BX=0000h
	  (see #02926)
SeeAlso: INT 2F/AX=7A00h,INT 64"Novell",INT 7A/BX=0000h