Category: <b>serial I/O</b>
<p>
<pre><b>INT 14 - FOSSIL - INITIALIZE DRIVER</b>

	AH = 04h
	DX = port number
	optionally BX=4F50h
		   ES:CX -&gt; byte to be set upon ^C
Return: AX = 1954h (if successful)
	BL = maximum function number supported (excluding 7Eh and above)
	BH = revision of FOSSIL specification supported
	DTR is raised
Note:	the word at offset 6 in the interrupt handler contains 1954h, and the
	  following byte contains the maximum function number supported; this
	  can serve as an installation check
SeeAlso: AH=05h"FOSSIL",AH=1Ch,INT 11/AH=BCh
Index:	installation check;FOSSIL
</pre>