INT 13 - HARD DISK - READ LONG SECTOR(S) (AT and later)

	AH = 0Ah
	AL = number of sectors (01h may be only value supported)
	CH = low eight bits of cylinder number
	CL = sector number (bits 5-0)
	     high two bits of cylinder number (bits 7-6)
	DH = head number
	DL = drive number (80h = first, 81h = second)
	ES:BX -> data buffer
Return: CF clear if successful
	CF set on error
	AH = status (see #00234)
	AL = number of sectors transferred
Notes:	this function reads in four to seven bytes of error-correcting code
	  along with each sector's worth of information
	data errors are not automatically corrected, and the read is aborted
	  after the first sector with an ECC error
	used for diagnostics only on PS/2 systems; IBM officially classifies
	  this function as optional
BUG:	on the original IBM AT BIOS (1984/01/10) this function does not disable
	  interrupts for harddisks (DL >= 80h). On these machines the MS-DOS/
	  PC DOS IO.SYS/IBMBIO.COM installs a special filter to bypass the
	  buggy code in the ROM (see CALL F000h:211Eh)
SeeAlso: AH=02h,AH=0Bh,MEM 0040h:0074h