Category: <b>power management</b>
<p>
<pre><b>INT 15 - Advanced Power Management v1.2 - GET/SET/DISABLE RESUME TIMER</b>

	AX = 5311h
	BX = device ID (see <a href=../../it/74/4.html>#00474</a>)
	    0000h (APM BIOS)
	    other reserved
	CL = function
	    00h disable Resume Timer
	    01h get Resume Timer
	    02h set Resume Timer
		CH = resume time, seconds (BCD)
		DL = resume time, minutes (BCD)
		DH = resume time, hours (BCD)
		SI = resume date (BCD), high byte = month, low byte = day
		DI = resume date, year (BCD)
Return: CF clear if successful
	    ---if getting timer---
	    CH = resume time, seconds (BCD)
	    DL = resume time, minutes (BCD)
	    DH = resume time, hours (BCD)
	    SI = resume date (BCD), high byte = month, low byte = day
	    DI = resume date, year (BCD)
	CF set on error
	    AH = error code (03h,09h,0Ah,0Bh,0Ch,0Dh,86h) (see <a href=../../it/73/4.html>#00473</a>)
Notes:	this function is supported via the INT 15, 16-bit protected mode, and
	  32-bit protected mode interfaces
SeeAlso: AX=5300h,AX=5310h,AX=5312h,AX=5313h
</pre>