INT 4D - TI Professional PC - DISK - VERIFY DISK SECTOR CRC(S)

	AH = 04h
	AL = number of sectors to verify (must be nonzero)
	CH = low eight bits of cylinder number
	CL = sector number 1-63 (bits 0-5)
	     high two bits of cylinder (bits 6-7, hard disk only)
	DH = head number
	DL = drive number (bit 7 set for hard disk)
	ES:BX -> data buffer
Return: CF set on error
	    if AH = 11h (corrected ECC error), AL = burst length
	CF clear if successful
	AH = status (see #00234 at INT 13/AH=01h)
	AL = number of sectors transferred
	ES:BX -> buffer for last sector processed (including one with errors)
Note:	even though no data is transferred, ES:BX must still be valid
SeeAlso: AH=00h,AH=01h,AH=02h,AH=06h,INT 13/AH=04h