From: "A. Sinan Unur" <asu1 AT cornell DOT edu>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: assembly
Date: 15 Oct 2001 20:03:31 GMT
Organization: Cornell University
Lines: 20
Sender: asu1 AT cornell DOT invalid (on 128.253.251.163)
Message-ID: <Xns913BA351D12CFASINANUNUR@132.236.56.8>
References: <9qf07f$1t6$1 AT cyan DOT nl DOT gxn DOT net> <9qf1s1$51v$1 AT nets3 DOT rz DOT RWTH-Aachen DOT DE> <9qf2jk$2k7$1 AT cyan DOT nl DOT gxn DOT net> <9qf4bp$7e4$1 AT nets3 DOT rz DOT RWTH-Aachen DOT DE>
NNTP-Posting-Host: 128.253.251.163
X-Trace: news01.cit.cornell.edu 1003176211 13580 128.253.251.163 (15 Oct 2001 20:03:31 GMT)
X-Complaints-To: usenet AT news01 DOT cit DOT cornell DOT edu
NNTP-Posting-Date: 15 Oct 2001 20:03:31 GMT
User-Agent: Xnews/4.06.22
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

Hans-Bernhard Broeker <broeker AT physik DOT rwth-aachen DOT de> wrote in 
news:9qf4bp$7e4$1 AT nets3 DOT rz DOT RWTH-Aachen DOT DE:

> Bart van den Burg <bart AT bart99 DOT tmfweb DOT nl> wrote:
> 
>> how would I change to screen mode 13 with GCC then in asm?
> 
> See the DJGPP FAQ, section 18.12 Inline Assembly code with GCC

by all means, do read the relevant sections of the faq, esp before posting.

also, you don't really need asm to change video mode. take a look at:

http://www.unur.com/comp/simpld_c.txt

Sinan.
-- 
--------------------------------
A. Sinan Unur
http://www.unur.com/