From: Hans-Bernhard Broeker <broeker AT physik DOT rwth-aachen DOT de>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: assembly
Date: 15 Oct 2001 16:54:17 GMT
Organization: Aachen University of Technology (RWTH)
Lines: 10
Message-ID: <9qf4bp$7e4$1@nets3.rz.RWTH-Aachen.DE>
References: <9qf07f$1t6$1 AT cyan DOT nl DOT gxn DOT net> <9qf1s1$51v$1 AT nets3 DOT rz DOT RWTH-Aachen DOT DE> <9qf2jk$2k7$1 AT cyan DOT nl DOT gxn DOT net>
NNTP-Posting-Host: acp3bf.physik.rwth-aachen.de
X-Trace: nets3.rz.RWTH-Aachen.DE 1003164857 7620 137.226.32.75 (15 Oct 2001 16:54:17 GMT)
X-Complaints-To: abuse AT rwth-aachen DOT de
NNTP-Posting-Date: 15 Oct 2001 16:54:17 GMT
Originator: broeker@
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

Bart van den Burg <bart AT bart99 DOT tmfweb DOT nl> wrote:

> how would I change to screen mode 13 with GCC then in asm?

See the DJGPP FAQ, section 18.12 Inline Assembly code with GCC


-- 
Hans-Bernhard Broeker (broeker AT physik DOT rwth-aachen DOT de)
Even if all the snow were burnt, ashes would remain.