From: Damian Yerrick Newsgroups: comp.os.msdos.djgpp Subject: Re: Installation problems of gcc on Windows95 Organization: Pin Eight Software http://pineight.8m.com/ Message-ID: References: <01c00177$c7e6c6a0$7cf9143e AT default> <200008082101 DOT RAA13960 AT delorie DOT com> X-Newsreader: Forte Agent 1.7/32.534 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Lines: 30 X-Trace: /ba9QdFj21kmlVH5RHp/JBg2FGsGwevqYUbClIJh97cyMthsr5Q8kWbmoYfFN7RVM19DLNhb/Vl7!vaE+0M/u+uYxfz5dYzzxCd43hkaB7FiHqW8zOj68Tahc+wKnF3aBe0p01h0fzIJyuYPUIwnZSE5b!TiTf X-Complaints-To: abuse AT gte DOT net X-Abuse-Info: Please be sure to forward a copy of ALL headers X-Abuse-Info: Otherwise we will be unable to process your complaint properly NNTP-Posting-Date: Tue, 08 Aug 2000 21:31:16 GMT Distribution: world Date: Tue, 08 Aug 2000 21:31:16 GMT To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Reply-To: djgpp AT delorie DOT com On Wed, 09 Aug 2000 00:04:17 +0200, "Eli Zaretskii" wrote: >So one thing to try is to put those two lines right at the beginning >of AUTOEXEC.BAT, after the line which runs SCANPM.EXE, reboot the >machine, and see if that helps. > >If it didn't help, try typing this two commands from the command line >in a DOS box: > > set DJGPP=C:\DJGPP\DJGPP.ENV > set PATH=C:\DJGPP\BIN;%PATH% > >Then try to compile some program from the same DOS box. And if that works, but the autoexec.bat doesn't, create a batch file c:\windows\command\djgpp.bat and write: set DJGPP=C:\DJGPP\DJGPP.ENV set PATH=C:\DJGPP\BIN;%PATH% Then type `djgpp' at a prompt before you compile. -- Damian Yerrick "I refuse to listen to those who refuse to listen to reason." See the whole sig: http://www.rose-hulman.edu/~yerricde/sig.html This is McAfee VirusScan. Add these two lines to your signature to prevent the spread of signature viruses. http://www.mcafee.com/