From: "Barry" Newsgroups: comp.os.msdos.djgpp Subject: Using allegro in RHIDE Lines: 35 X-Priority: 3 X-MSMail-Priority: Normal X-Newsreader: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Message-ID: Date: Sat, 20 May 2000 14:47:08 -0500 NNTP-Posting-Host: 204.2.12.62 X-Complaints-To: abuse AT verio DOT net X-Trace: dfw-read.news.verio.net 958852060 204.2.12.62 (Sat, 20 May 2000 19:47:40 GMT) NNTP-Posting-Date: Sat, 20 May 2000 19:47:40 GMT Organization: Verio To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Reply-To: djgpp AT delorie DOT com I'm still unable to get my program to run in rhide. It's a simple program that uses allegro. So, I've deleted and totally re-installed djgpp and rhide and allegro. I've found that if I run the program in rhide with ctrl F9 and have no breakpoints, the program runs to completion and all is well. But, if I put a breakpoint on the first executable line in main and run it I get the following error: Program has received a signal: SIGFPE, Arithmetic exception. If I try to run my program (after compiling from the command line or with RHIDE) with rhgdb, it crashes early in the program and the messages scroll by too fast for me to know what happened. But in rhgdb it crashes whether I try to use a breakpoint or just run the program. I can run the program from dos just fine. I'm doing this on an old 486sx laptop and of course there is no FPU. Is there something I have to do to tell rhide that I don't have an FPU? I don't really know this is the problem but it's all that I can think of I've also tried ex1.c, the first example program that comes with allegro and I have exactly the same results with it. It works fine from the command line but run with a breakpoint or with F4 in rhide, I get the arithmetic exception. Does anyone have any ideas? Barry