From: "bowman" <bowman AT montana DOT com>
Newsgroups: comp.os.msdos.djgpp
References: <8rBakUC00UwG1KQkU0 AT andrew DOT cmu DOT edu>
Subject: Re: Plz Help. Assembly or com/lptt port help
Lines: 15
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2014.211
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211
Message-ID: <wcAZ2.3426$mW3.16544@newsfeed.slurp.net>
Date: Mon, 10 May 1999 06:21:50 -0600
NNTP-Posting-Host: 208.4.224.77
X-Trace: newsfeed.slurp.net 926338972 208.4.224.77 (Mon, 10 May 1999 07:22:52 CDT)
NNTP-Posting-Date: Mon, 10 May 1999 07:22:52 CDT
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com


James W Sager Iii <sager+@andrew.cmu.edu> wrote in message
news:8rBakUC00UwG1KQkU0 AT andrew DOT cmu DOT edu...
> I'm looking to learn on how to manipulate output.
> Is there programs in C that allow manipulation of com ports or LPT ports?

http://www.lvr.com/parport.htm

> It would be great if you could reply to my account as I can't sift
> through this spammy forum.

so it goes....