From: "R.H." Newsgroups: comp.os.msdos.djgpp Subject: rhide 1.4.7 problem with print setup Date: Sat, 1 May 1999 01:43:30 -0700 Organization: Alternate Access Incorporated Lines: 17 Message-ID: <7geegr$jg7$1@slave3.aa.net> NNTP-Posting-Host: 206.125.80.8 X-Priority: 3 X-MSMail-Priority: Normal X-Newsreader: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Reply-To: djgpp AT delorie DOT com When I use Rhide 1.4.7, I am having problems with the print setup. I enter the commands for my HP Laserjet 5L printer and it prints okay, except that in the left margin there are these 3 character codes: s5T in the header, s0B in the body, s3B in the footer. Also, when I exit Rhide and then restart Rhide all my manually entered printer command codes have disappeared and it goes back to the printer setup default codes. This is very annoying to have to enter the printer command codes every time I start Rhide. I know Rhide is based on Setedit which I also have and it does not do this. With Setedit all I have to do is enter the printer command codes once and it remembers them every time. Does anyone know if this is a bug in Rhide that is scheduled to be fixed in the next version or if there is a file that I can edit so I do not have to enter the codes every time. Thanks, Roger