From: krugman AT nospam DOT demon DOT co DOT uk (Kevin)
Newsgroups: comp.os.msdos.djgpp
Subject: Re: rhide user screen
Date: Mon, 26 Apr 1999 20:06:31 GMT
Message-ID: <3724c605.356244@158.152.254.68>
References: <37218f7f DOT 3971060 AT news DOT clara DOT net>
NNTP-Posting-Host: reality-bytes.demon.co.uk
X-NNTP-Posting-Host: reality-bytes.demon.co.uk:212.228.30.60
X-Trace: news.demon.co.uk 925157141 nnrp-04:8896 NO-IDENT reality-bytes.demon.co.uk:212.228.30.60
X-Complaints-To: abuse AT demon DOT net
X-Newsreader: Forte Agent 1.5/32.451
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 30
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

On Sat, 24 Apr 1999 09:34:54 GMT, neiled AT clara DOT net (Neil Edwards)
wrote:

>Hi there, I have a problem with the rhide user screen. After I have
>compiled and run a simple program (or any for that matter) when I
>switch to the user screen it is just black. If I run the prgram
>seperately then I can see the results fine. Also I have noticed that
>when i run it in full screen under 95 trhough command.com dos prompt
>and then exit rhide its black also, you don't get the credit type
>message.
>Anyone any ideas?
>Thanks for reading
>
>- Neil Edwards


I have exactly the same problem, i.e. blank user screen and blank dos
prompt. I have gone throught the FAQ but to no avail, I did post about
this some time ago but again to no avail.

I have a Matrox millenium II with 4MB ram.

If I ever do hear of a cure for this one, I will post it.
Kevin.

kevin AT reality-bytes DOT demon DOT co DOT uk

   ^ ^ ^ , , ^ ^ ^
  / \ \ \0 0/ / / \  What, No Sig ?
_/_/_/    ^    \_\_\_