From: bitland AT aol DOT com (Bitland)
Newsgroups: comp.os.msdos.djgpp
Subject: Re: Need help in Assembler-Source-Translation
Lines: 21
NNTP-Posting-Host: ladder01.news.aol.com
X-Admin: news AT aol DOT com
Date: 1 Feb 1999 00:37:35 GMT
Organization: AOL Bertelsmann Online GmbH & Co. KG http://www.germany.aol.com
References: <19990130212655 DOT 09477 DOT 00001990 AT ng43 DOT aol DOT com>
Message-ID: <19990131193735.13889.00002569@ng142.aol.com>
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com


>Hi !
>To write a Soundscape-driver for Allegro, I need help to translate an
assembler-source-file (about 4k) from MS-Assembler (for Watcom) to
DGJPP-Assembler. It's a protected/real-mode-interrupt-problem, so it isn't
>easy at all, because in one routine 16-bit-code must be forced.
>So if you are experienced in assembler-programming, this would be a great
>help to getting started for me. I don't know if this piece of code isn't
really
>necessary for the driver at last (...and I don't hope so!). Please write to
>my
>e-mail adress:
>bitland AT aol DOT com.

To specify that:
It's an Intel -> AT&T conversion problem.
The most is done with DJGPP's infos, just need help with the segments and
datas.
Thanks
Andy (bitland AT aol DOT com)