From: Endlisnis Newsgroups: comp.os.msdos.djgpp Subject: Re: Largest DJGPP project Date: Thu, 27 Aug 1998 20:27:01 -0300 Organization: NBTel Internet Lines: 27 Message-ID: <35E5EB45.28C3061F@unb.ca> References: NNTP-Posting-Host: fctnts07c03.nbnet.nb.ca Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk George Foot wrote: > "go32" is the DOS extender used by djgpp v1. I don't remember > exactly, but IIRC you had to run go32 passing the name of your COFF > image to run it. DJGPP v2 uses the stub instead, and no extender. What does IIRC stand for? > Did you adjust the DPMI memory provision in your DOS box settings? > Set it to 65535 and you should get more swap space. Under djgpp v2 > the amount of memory you get is entirely up to whatever DPMI server > you use. On my system, in Windows 98 the two numbers add up to just > over 65000, which is what you would expect. No, I didn't adjust it, because I normally don't use that much RAM, and don't need it. When I did set it to that value, it only gives me 31Megs. Does it put more strain on the system to set that higher if it is not used at all? -- (\/) Endlisnis (\/) s257m AT unb DOT ca Endlisnis AT GeoCities DOT com Endlis AT nbnet DOT nb DOT ca