Message-ID: <35A854C8.97C591F6@texas.net> From: Ricky MIME-Version: 1.0 Newsgroups: comp.os.msdos.djgpp Subject: Re: [Q] re-install - I failed! :( References: <6o99jm$r1t$1 AT kurica DOT wt DOT com DOT au> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Lines: 45 Date: Sun, 12 Jul 1998 06:16:40 GMT NNTP-Posting-Host: 209.99.49.153 NNTP-Posting-Date: Sun, 12 Jul 1998 01:16:40 CDT To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk I'm an absolute newbie at this, so don't take my word for fact, but did you run the Allegro makefile? just a suggestion Highway*Star wrote: > Hello all, > 2 days ago, I went to the www.delorie.com site and realised that they were a > lot of new versions of djgpp/allegro stuff so I went through the zip-picker > and downloaded a whole new set. > > After installing everything, I fired up the pieces and everything seemed ok. I > then started to build separate projects for the allegro code examples, > basically to make sure everything works. The first 2 examples (ex1.c, ex2.c) > fired up ok...so I thought everything was ok... since these code snippets > would have called & used djgpp& allegro to create an executable... > > but alas, all was not well.... > > Further on, examples like ex13.c would compile but then crash when executed... > Now with the setup I had before I could compile all 30 or so examples no > probs, and they all worked fine... But with this new setup, that's not the > case... > > A couple of things I did notice is that I used to have 'allegro' installed > from the root dir... ie "c:\allegro" but this time I followed the zip-picker > and its installing allegro from within c:\djgpp so its now > c:\djgpp\allegro\... > > Another thing is that I faintly remember having to copy a alleg.a(???) into a > djgpp dir, but the instructions don't ask to do this anymore... > > Anyone? Suggestions? Please! > > Details: > All my paths *are* set...and I have rebooted... > I do include "alleg" and then include the option in RHIDE... > Code is the same... > I have tried with & without cwsdpmi....they still crash... > > Cheers, > Rob D. > West Oz.