Sender: nate AT cartsys DOT com
Message-ID: <35941778.455E9E5C@cartsys.com>
Date: Fri, 26 Jun 1998 14:49:44 -0700
From: Nate Eldredge <nate AT cartsys DOT com>
MIME-Version: 1.0
To: Marokart AT aol DOT com
CC: djgpp AT delorie DOT com
Subject: Re: Installation of DJGPP compiler w/ RHIDE
References: <366655d9 DOT 3593ae42 AT aol DOT com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Precedence: bulk

Marokart AT aol DOT com wrote:
> 
> I would like to know how to install the basics of the DJGPP compiler. Just to
> the point where I could write, run, and compile fairly basic C programms
> (somethings in the way of little games).  I have been having some troubles
> getting it working.  If you would kindly tell me which files I needed and how
> to set the compiler up (or point me to an area where I could recieve detailed
> information) I would appreciate it.

The Zip Picker at http://www.delorie.com/djgpp/ can tell you what you
need to download, based on what you plan to do.  It also refers you to
the README.1ST file, which contains instructions on how to install. 
Read it thoroughly!

Some problems that have appeared more recently are addressed in the file
gnu/gcc-2.81/problems.txt that will appear when you unzip the GCC
package.  Read that if any problems show up.

The FAQ is a great source of information as well; the Zip Picker can
give it to you.

Should you have any problems not mentioned in any of those places, post
here, after reading FAQ section 6.12.
-- 

Nate Eldredge
nate AT cartsys DOT com