Message-Id: Comments: Authenticated sender is From: "Salvador Eduardo Tropea (SET)" Organization: INTI To: "Lennart Marien" , djgpp AT delorie DOT com Date: Wed, 6 May 1998 14:32:27 +0000 MIME-Version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Subject: Re: Two questions! In-reply-to: <6ipp86$1tm$1@news.metronet.de> Content-Transfer-Encoding: 8bit Precedence: bulk "Lennart Marien" wrote: > My first question is: > How can I use ASCII Code B3 in Rhide? > This seems to be the one who is used to > replace the logical/arithmetical OR operator! > (like &/&&/=/==) No! 0xB3 is the side of a box, the character you need is 0x7C and I guess is somewhere in your keyboard. I guess you are using a german one, in the USA keyboards is SHIFT+BACK_SLASH and the position depends on the keyboard manufacturer. > And my second problem is more complicated:I can use Rhide in Win95 > without problems, but after compiling a program with the C compiler Rhide > crashes. > (General Protection Fault (Win95)) > I gave Rhide 16Megs of DPMI memory. Try giving 65536 Kb. > There¦s one thing which maybe is the problem, but I couldn¦t figure it out: Seems your mailer is encoding the text is some strange way, I got the or charcater insted of "apostrofes". > I¦¦m using CWSDPMI a dos extender, and > it starts in my autoexec AND in my dosstart > batch files.What is the problem?BTW > under real DOS Mode everything works > fine! Don't call CWSDPMI if you are using WIN95!!! delete the lines in autoexec.bat and dosstart.bat!! Gruesse, SET ------------------------------------ 0 -------------------------------- Visit my home page: http://set-soft.home.ml.org/ or http://www.geocities.com/SiliconValley/Vista/6552/ Salvador Eduardo Tropea (SET). (Electronics Engineer) Alternative e-mail: set-soft AT usa DOT net set AT computer DOT org ICQ: 2951574 Address: Curapaligue 2124, Caseros, 3 de Febrero Buenos Aires, (1678), ARGENTINA TE: +(541) 759 0013