From: "John M. Aldrich" <fighteer AT cs DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: compiling allegro error?
Date: Fri, 13 Mar 1998 20:29:49 -0500
Organization: Two pounds of chaos and a pinch of salt.
Lines: 25
Message-ID: <3509DD8D.5080@cs.com>
References: <3 DOT 0 DOT 5 DOT 32 DOT 19980311113711 DOT 007ab280 AT pop DOT iquest DOT net>
NNTP-Posting-Host: ppp210.cs.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

Ricki Lee King wrote:
> 
> i got grx installed and its examples compile from rhide.
> i dl'ed and unzipped allegro in my djgpp directory.
> i ran make in the main allegro directory.
> it ran 10 minutes or so then coughed up an error
> about undefined functions. i suspect i need
> to put something in djgpp environment.
> should i run the setup up program befor or
> after i run make? thanks.

Allegro's setup program is not what you need to configure DJGPP.  Read
the instructions in 'readme.1st' for the correct setting of the PATH and
DJGPP environment variables in your 'autoexec.bat'.  If you still don't
understand, read the Frequently Asked Questions list, chapter 8.1.

-- 
John M. Aldrich, aka Fighteer I <fighteer AT cs DOT com>  UIN# 7406319

-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS d- s+:- a-->? C++>$ U@>++$ p>+ L>++ E>++ W++ N++ o+>++ K? w(---)
O- M-- V? PS+ PE Y+ PGP- t+(-) 5- X- R+(++) tv+() b+++ DI++ D++ G>++
e(*)>++++ h!() !r !y+()
------END GEEK CODE BLOCK------