Message-Id: <m0y0oL6-000S2tC@inti.gov.ar>
Comments: Authenticated sender is <salvador AT natacha DOT inti DOT gov DOT ar>
From: "Salvador Eduardo Tropea (SET)" <salvador AT inti DOT gov DOT ar>
Organization: INTI
To: "Frank Adam" <fadam AT sensation DOT net DOT au>, djgpp AT delorie DOT com
Date: Fri, 6 Feb 1998 17:08:34 +0000
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Subject: Re: rhide won't run programs
In-reply-to: <01bd3215$88f065c0$569624cb@fadam>
Precedence: bulk

"Frank Adam" <fadam AT sensation DOT net DOT au> wrote:

> Hi there,
> I've just installed djgpp and after doing the normal printf("hello world");
> program it seemed to work fine, then i've loaded in an existing source i
> have and it worked fine.
> But now every time i go into rhide, the run command is disabled and only
> "compile"is enabled. 
> I am stumped, i can not link or make an exe with rhide at all. 
> Has anyone any ideas ? AFAIK i haven't changed anything in the
> options..running in WIN95 window.   

Try using a project:

1) Go to Projects|Open and give a name to your project.
2) Select the project window.
3) Insert the source/s (with the insert key) in your project.
4) Press Ctrl+F9

SET 
------------------------------------ 0 --------------------------------
Visit my home page: http://set-soft.home.ml.org/
or
http://www.geocities.com/SiliconValley/Vista/6552/
Salvador Eduardo Tropea (SET). (Electronics Engineer)
Alternative e-mail: set-sot AT usa DOT net - ICQ: 2951574
Address: Curapaligue 2124, Caseros, 3 de Febrero
Buenos Aires, (1678), ARGENTINA
TE: +(541) 759 0013