Message-Id: <m0y0oBD-000S2tC@inti.gov.ar>
Comments: Authenticated sender is <salvador AT natacha DOT inti DOT gov DOT ar>
From: "Salvador Eduardo Tropea (SET)" <salvador AT inti DOT gov DOT ar>
Organization: INTI
To: Sean Tash <Sean AT tesi DOT net>, djgpp AT delorie DOT com
Date: Fri, 6 Feb 1998 16:53:17 +0000
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Subject: Re: display problem in rhide
In-reply-to: <34D8608B.10A6972A@tesi.net>
Precedence: bulk

Sean Tash <Sean AT tesi DOT net> wrote:

> For some reason after I exit rhide the screen stays blank.  I found a
> work around but it slows things down. I made a little asm program that
> all it does is flip to text mode and that brings up the dos prompt.
> anyone have any ideas why it might be doing this? the video card I'm
> using is a Matrox Millenium II.

Try using another video mode inside of the IDE.
Does it happend under W95? If yes be sure you have the last drivers from 
Matrox.
Try using -G1 as parameter for the IDE.
If the board have any DOS utility for VESA (I really doubt it) be sure is 
loaded.

SET 
------------------------------------ 0 --------------------------------
Visit my home page: http://set-soft.home.ml.org/
or
http://www.geocities.com/SiliconValley/Vista/6552/
Salvador Eduardo Tropea (SET). (Electronics Engineer)
Alternative e-mail: set-sot AT usa DOT net - ICQ: 2951574
Address: Curapaligue 2124, Caseros, 3 de Febrero
Buenos Aires, (1678), ARGENTINA
TE: +(541) 759 0013