Message-Id: <m0xyIMb-000S25C@inti.gov.ar>
Comments: Authenticated sender is <salvador AT natacha DOT inti DOT gov DOT ar>
From: "Salvador Eduardo Tropea (SET)" <salvador AT inti DOT gov DOT ar>
Organization: INTI
To: netuser <netuser AT erols DOT com>, djgpp AT delorie DOT com
Date: Fri, 30 Jan 1998 18:36:42 +0000
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Subject: Re: Compiling with RHIDE
In-reply-to: <34D1F4A5.A029BDF5@erols.com>
Precedence: bulk

netuser <netuser AT erols DOT com> wrote:

> When selecting  source and object file directories for RHIDE to store
> files (by going to Options/Directories menu), the program only shows
> "Compile" as the active command in the Compile menu (i.e. "Make", "Link"
> and "Build all" are greyed out) if one tries to compile any source file
> in those directories.  This does not happen if all source and objet
> files are in the DJGPP root directory.
> 
> Can someone help?

I don't understand your problem very well, here is what you must do:

1) Start RHIDE from the directory where you have your sources, not from 
c:\windows or %DJGDIR%\bin.
2) Go to Project|Open
3) Give a name to your new project
4) Select the project window
5) Insert your source/s using the insert key
6) Press Ctrl+F9

SET 
------------------------------------ 0 --------------------------------
Visit my home page: http://set-soft.home.ml.org/
or
http://www.geocities.com/SiliconValley/Vista/6552/
Salvador Eduardo Tropea (SET). (Electronics Engineer)
Alternative e-mail: set-sot AT usa DOT net - ICQ: 2951574
Address: Curapaligue 2124, Caseros, 3 de Febrero
Buenos Aires, (1678), ARGENTINA
TE: +(541) 759 0013