From: Victor jetten <jeten AT laon DOT inra DOT fr>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: RHIDE: CPU working at full capacity
Date: Tue, 13 Jan 1998 15:56:25 -0800
Organization: INRA
Lines: 23
Message-ID: <34BBFF29.7B53B1D7@laon.inra.fr>
References: <34baa59b DOT 26212656 AT news DOT cs DOT tu-berlin DOT de>
NNTP-Posting-Host: 192.93.98.129
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk



Lars Frantzen wrote:

> Hi there !
>
> I'm new to RHIDE and I don't know how to solve this:
>
> I'm running Rhide under Win95 with 48 MB RAM and a
> Pentium 133. Everything works fine, but after booting Rhide the CPU is
> working non-stop at full capacity. I tried to change the way Win95
> starts MS-DOS programs but it did not help. I also found no hint in
> the FAQ.

I doing the same but have not noted Rhide taking up excessive cpu time.
Under the properties of the dos box you can specify the amount of RAM: the
pulldown box lets you go just to 16Mbyte. However, this is not a limit:
you can type any number by hand (e.g. 32 Mbyte)!
Hope this helps.
Victor