From: Martin Bernreuther Newsgroups: comp.os.msdos.djgpp Subject: Re: RHIDE & STL link command bug? Date: Mon, 12 May 1997 10:30:27 +0000 Organization: University of Stuttgart Lines: 33 Message-ID: <3376F143.9C1E4@po.uni-stuttgart.de> References: <336a5032 DOT 11085183 AT news DOT iol DOT it> <336B5B64 DOT 5A78 AT cornell DOT edu> Reply-To: Martin DOT Bernreuther AT po DOT uni-stuttgart DOT de NNTP-Posting-Host: iv-kib1.bauingenieure.uni-stuttgart.de Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk A. Sinan Unur wrote: > > Daniele Prato wrote: > > > > I am a new user of DJGPP tools and RHIDE and I plan to use STL... > > But I have a problem linking project. > > > > When rhide link, use the command: > > > > gcc -Xlinker -lstdcxx -oauto.exe auto.o loop.o sito.o veicle.o > > > > (I have added "-lstdcxx" option in "Options-Linker Options" menu of > > rhide). > > that probably is your problem. try adding stdcxx (that will only work if > you are working under windows 95 and unzipped using long filenames and > the long filename option is turned on in your djgpp.env, but from the > rest of your post, i think that is your situation, otherwise use stdcx) > in the Options-Libraries menu and leave the linker options alone. note > DO NOT put "-lstdcxx" in Options-Libraries, just stdcxx. I thougt it's stdcx, because libstdcx already has 8 letters... Martin ------------------------------------------------------------------------ Dipl.-Ing. Martin Bernreuther University of Stuttgart Pfaffenwaldring 7 Informationsverarbeitung im 70569 Stuttgart konstruktiven Ingenieurbau Germany E-Mail: Martin DOT Bernreuther AT po DOT uni-stuttgart DOT de http://www.uni-stuttgart.de/iv-kib/ ------------------------------------------------------------------------