From: oml1 AT Ra DOT MsState DOT Edu (Owen LaGarde) Newsgroups: comp.os.msdos.djgpp Subject: DJGPP 2.01 + OpenDOS = total clusterfuck Date: 2 May 1997 15:12:58 GMT Organization: Mississippi State University Lines: 34 Message-ID: <5kd09q$elr$1@NNTP.MsState.Edu> NNTP-Posting-Host: ra.msstate.edu To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk I've been coding under a variety of OSs for quite some time, and just recently decided to try djgpp 2.01 ... unfortunately, I was also trying out Caldera's OpenDOS as well. I have truly never seen a bigger mess than this: with a 486DX4/100-16M station, 6M temp and 4M swap, I dropped in grx20 off the simtel dist site (djgpp/v2tk/grx20.zip). It built with no evident problems, but upon experimenting, I found that running ANY executable corrupted seemingly random high-mem blocks, usually resulting in the top shell crapping out. It's so interesting to follow installation instruction to the letter only to see the following: 1) 2) program exits (cleanly?) 3) that's odd, everything's "file not found"... oh, the path is clobbered 4) "dir" returns no entries for all drives attempted 5) reboot 6) scan -- nothing 7) chkdsk reports lost clusters over all files "accessed" in (3) 8) chkdsk /f locks 9) reboot by floppy 10) scan -- nothing 11) reboot 12) boot sector corrupted -- fdisk /mbr 13) reboot 14) partition table for volume containing djgpp root is corrupted 15) fdisk, reboot, format, long re-install..., boot boot boot boot boot What fresh hell is this?!? I'll try PC DOS 6.2 when I get a chance after work, but has anyone seen anything even remotely like this, or had any success with 2.01 and OpenDOS? -- "... Oh, what a Tangled Web ..." Owen LaGarde lagarde AT walt DOT cs DOT msstate DOT edu