From: "Alex A. Mikh" <boroda AT sich DOT freenet DOT kiev DOT ua>
Newsgroups: comp.os.msdos.djgpp
Subject: Help: internal compiler error!
Date: 7 Apr 1997 22:35:14 +0300
Organization: Shevchenko Institute Literature
Lines: 112
Sender: news AT freelunch DOT freenet DOT kiev DOT ua
Distribution: world
Message-ID: <AAkPLIpiY7@sich.freenet.kiev.ua>
Reply-To: boroda AT sich DOT freenet DOT kiev DOT ua
NNTP-Posting-Host: freelunch.freenet.kiev.ua
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

Gentlemen,
I will appreciate your kind assistance in a following matter.  For
some time I'm engaged with creation of programs, using with DJGPP
(lately DJGPP v.2) for MsDos 6.20.  There were no problems while I was
using my old computer (486DX2-80/12M RAM/210 HDD/Trident 8900 1M).
After upgrading the computer (MB ABIT PR5R2/K5-133/16M EDO RAM/S3
Trio64V+ 1M) while compiling BIG old checked programs the message
appears:

    Internal compiler error
or
    Abort!

I tried to use CWSDPMI host (release 3) as well as QDPMI v.8.0,
MsWin 3.1 and Win95.  There's not enough place for the swap file on
the drive.  For example, go32-v2:

                 DPMI memory available: 12519 Kb
                 DPMI swap space available: 50495 Kb

The compiling errors appear but in different place. The placement of
translation abortion depends also on the ramdrive and smartdrive
size. The only configuration, in which the translation is possible
without errors is the absence of any smartdrive and ramdrive. At the
same time the big 32-bit programs like QWAKE do work.

I'd like to understand: are my problems the result of the bad
hardware, or this means any bugs in GCC. Can the problems of
translation be solved by any means? Here is the text of my system
files.

Many thanks for your help beforehand.
Best regards, Alex. Mikhalevsky.

-----------------------------------------------------------------------
CONFIG.SYS file:

[common]
DOS=HIGH,UMB
LASTDRIVE=Z
Buffers=20,2
Files=60
Stacks = 9,256
SHELL=C:\DOS\COMMAND.COM C:\DOS\ /E:4096 /P
DEVICE=E:\Stacker\DPMS.EXE

[Menu]
MenuItem=_QR_,          Qemm+RamDrv
MenuItem=_H_,           HiMem
MenuItem=_HR_,          HiMem+RamDrv
MenuDefault=_H_,2

[_QR_]
DEVICE=E:\QEMM\QEMM386.SYS RAM
DEVICE?=E:\QEMM\QDPMI.SYS SWAPFILE=d:\Temp\DPMI.SWP SWAPSIZE=5000
device=e:\qemm\dos-up.sys @e:\qemm\dos-up.dat
device=e:\qemm\loadhi.sys E:\Stacker\STACHIGH.SYS
device=e:\qemm\loadhi.sys C:\DOS\RAMDrive.SYS   2512 512 256 /E
device=E:\Stacker\SCreate.SYS T:

[_H_]
device=C:\DOS\HIMEM.SYS /TestMem:Off
device=C:\DOS\EMM386.EXE noems
DEVICEHIGH=E:\Stacker\STACHIGH.SYS

[_HR_]
device=C:\DOS\HIMEM.SYS /TestMem:Off
device=C:\DOS\EMM386.EXE noems
DEVICEHIGH=E:\Stacker\STACHIGH.SYS
DEVICEHIGH=C:\DOS\RAMDrive.SYS  1500 512 256 /E
DeviceHigh=E:\Stacker\SCreate.SYS T:

----------------------------------------------------------------------
AUTOEXEC.BAT file:

@ECHO OFF
Prompt $T$H$H$H$L$P$G
SET COMSPEC=C:\DOS\COMMAND.COM
E:\Stacker\CHECK /WP
PATH F:\DjGpp\bin;C:\DOS;
set TMPDIR=D:\Temp
set DJGPP=F:\DjGpp\djgpp.env
set GRX20DRV=VESA gw 640 gh 480 nc 256
set GRXFONT=F:\DjGpp\contrib\grx20\fonts
C:\DOS\MODE CON RATE=32 DELAY=1
GoTo %CONFIG%

:_QR_
e:\qemm\loadhi C:\Dos\SmartDrv.EXE 4000
E:\Stacker\STACKER.COM @T:\STACVOL.DSK
md T:\Temp
SET TMP=T:\Temp
SET TEMP=T:\Temp
GoTo END

:_H_
Lh C:\Dos\SmartDrv.EXE 2000
SET TMP=D:\Temp
SET TEMP=D:\Temp
GoTo END

:_HR_
Lh C:\Dos\SmartDrv.EXE 3000
SET TMP=D:\Temp
SET TEMP=D:\Temp
E:\Stacker\STACKER.COM @T:\STACVOL.DSK
md T:\Temp
SET TMP=T:\Temp
SET TEMP=T:\Temp
GoTo END

:END