Message-ID: <3315E9FD.730F@post.comstar.ru>
Date: Thu, 27 Feb 1997 12:09:33 -0800
From: Dim Zegebart <zager AT post DOT comstar DOT ru>
Reply-To: zager AT post DOT comstar DOT ru
Organization: zager AT post DOT comstar DOT ru
MIME-Version: 1.0
To: Zibarev Denis <den AT re DOT tsu DOT tomsk DOT su>
CC: DJGPP Mail List <djgpp AT delorie DOT com>
Subject: Re: LD hangs!!!!
References: <199702271308 DOT NAA13043 AT re DOT tsu DOT tomsk DOT su>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Zibarev Denis wrote:
> 
> Hi, all!!
> 
> Can I ask U a very stupid question?
> (I'm using DJGPP v2.01)
> If so, here it:
>    Why LD.EXE hangs when linking a small program with a probability
>    approx. 10%? Usually it is not very painfully (I'm a proud user
>    of IBM OS/2 Warp V3.0), but sometime, when I working in DOS, ... :(
>    My system is: (i486DX2/66 GenuineIntel, VLB, 16Mb RAM, Cirrus Logic
>    CL-GD5428 with 1Mb VRAM, Micropolis 4110-Nov_18FTN0F hard drive (1Gb,
>    Fast SCSI-2) with BusLogic BusMaster SCSI host adapter BT-545S).
>    Running DOS 6.22, OS/2 Warp, microbug windows95.
>    Here are configuration file contests:
> mode con codepage prepare=((866) C:\WINDOWS\COMMAND\ega3.cpi)
> mode con codepage select=866
> keyb ru,,C:\WINDOWS\COMMAND\keybrd3.sys

I also have had similar problems with some djgpp's stuff.
But now it gone away ;)
The problem was in my CMOS setup.
So, I advise you to load BIOS defaults and
then step by step restore settings along with
testing your software.

(In my case it was PIO Mode settings. Set up the slowest mode and see
what happens)


-- 
Regards,
Dim Zegebart,
Moscow Russia.