Xref: news2.mv.net comp.os.msdos.djgpp:8089
From: "Maan M. Hamze" <mmhamze AT mail DOT utexas DOT edu>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: another q about rhide
Date: 31 Aug 1996 01:11:40 GMT
Organization: University of Texas at Austin
Lines: 32
Message-ID: <01bb96d8$dcbe9340$04fb5380@maan-m.-hamze>
References: <9608302059 DOT AA26235 AT pdv DOT com>
NNTP-Posting-Host: slip-51-4.ots.utexas.edu
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

CSSPT AT LGVOP2 DOT PDV DOT COM wrote in article <9608302059 DOT AA26235 AT pdv DOT com>...
> 
>  i installed successfully my rhide and after compile a file i can use
make
>  or run,why is happening this, 

I just can not understand the question!  could you rephrase that?
My guess is that you are wondering why RHIDE can not make or run or link a
C/C++ file!  Right?  If that is the case, the answer is that you have to
start a project as things stand now.  Open a project and add your files to
it (including your source code).  Through the project, RHIDE will make, run
and link!

>other estrange thing is that rhide doesn't
>  keep the path for the lib and includes directories i wrote when i start
the pro
>  gram again, 

It will save all these settings when you are dealing with projects.  Just
get in the habit of working with projects even when you are working with
one C/C++ file.

sorry if this question bothers you but i can't find nothing useful
>  for this problem at the txts...

No bother at all, and good luck!
> 
M
-- 
Maan M. Hamze
mmhamze AT mail DOT utexas DOT edu
http://leb.net/~mmhamze