Xref: news2.mv.net comp.os.msdos.djgpp:7798
From: "John M. Aldrich" <fighteer AT cs DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: How to plot points (in 320x200x256)
Date: Mon, 19 Aug 1996 20:42:48 -0700
Organization: Three pounds of chaos and a pinch of salt
Lines: 31
Message-ID: <32193438.6DB8@cs.com>
References: <4v9dtt$397g AT news-s01 DOT ny DOT us DOT ibm DOT net>
NNTP-Posting-Host: ppp206.cs.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: Dean <deanph AT ibm DOT net>
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

Dean wrote:
> 
> I've finally got DJGPP up and running.  I can get in mode 13h
> and all that, I can write text, but what I can't do is write
> directly to memory to plot points, what with all the protected
> mode and all.  Is there some other way to plot points on the
> screen, is there something I could read (not FAQ200b.zip, it was
> no help:)

The FAQ does indeed answer this question; section 10 specifically covers 
graphics programming under DJGPP.  It also gives pointers to several 
locations where you can find more information.  Also, you need to get the 
latest version of the FAQ (faq201b.zip), because it has updated info on a 
lot of things.

To summarize the FAQ briefly, there are two main ways to put a pixel to 
the graphics screen:  use the _farpokeX functions to write to the 
specific memory location you want, or enable near pointers and write 
directly to the graphics area.

John

-- 
John M. Aldrich, aka Fighteer I <fighteer AT cs DOT com>

-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS d- s+:- a-->? c++>$ U@>++$ p>+ L>++ E>+ W+>++ N++ o+ K? w(---) O-
M-- V? PS+ PE Y+ PGP- t+(-) 5- X- R+ tv+() b+++ DI++ D++ G e(*)>++++
h!() !r !y+()
------END GEEK CODE BLOCK------