Xref: news2.mv.net comp.os.msdos.djgpp:1788
Newsgroups: comp.os.msdos.djgpp
From: zcacbb1 AT ucl DOT ac DOT uk (Benedict Baylis)
Subject: Re: "info" file for flex?
Message-ID: <1996Mar11.132550.41108@ucl.ac.uk>
Date: Mon, 11 Mar 1996 13:25:50 GMT
Reply-To: zcacbb1 AT cs DOT ucl DOT ac DOT uk
References: <030596203528Rnf0 DOT 79b6 AT magnorth DOT nildram DOT co DOT uk>
Organization: University College London
Lines: 22
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

In article <030596203528Rnf0 DOT 79b6 AT magnorth DOT nildram DOT co DOT uk>, sysop AT magnorth DOT nildram DOT co DOT uk (Simon Chapman) writes:
|> I'm currently learning to use Bison and Flex. Whilst the doc for Bison 
|> is great, there does not seem to be any formatted doc for Flex. All I have
|> is what looks like "nroff" or "troff" input, which is difficult to read 
|> without the right software. I'm using Flex 2.4.7.
|> 
|> If anyone could point me in the right direction, I would be most grateful.
|> 
|> Many Thanks!
|> --
|> Simon


I thoutgh that the latest version of flex for djgpp came with an info file. 
I have it, if you can't find in the djgpp112m4 distribution on the simtelk let me know and
I'll forward it to you
--
\_\_\_\_   \_\_\_\_  \_    \_     *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+
 \_     \_  \_        \_\_  \_    +   Ben Baylis (B DOT Baylis AT cs DOT ucl DOT ac DOT uk)   *
  \_\_\_\_   \_\_\_    \_ \_ \_   *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+
   \_     \_  \_        \_  \_\_  + Give me a ZX81 and I'll rule the world *
    \_\_\_\_   \_\_\_\_  \_    \_ *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+