Xref: news-dnh.mv.net comp.os.msdos.djgpp:4323 gnu.g++.help:4155 From: "Michael E. Wesolowski" Newsgroups: comp.os.msdos.djgpp,gnu.g++.help Subject: building libg++-271 on DOS Date: Fri, 12 Jan 1996 19:54:37 -0700 Organization: Calgary Free-Net Lines: 19 Message-ID: NNTP-Posting-Host: mewesolo AT srv1 DOT freenet DOT calgary DOT ab DOT ca To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp I'm attempting to build libg++-2.7.1 on DOS using gcc 2.7.2 (hopefully built correctly) and am having a miserable time. There is no convenient configur.bat file provided with the distribution as there was for gcc. I discovered that the libg++-262 source distribution that came with the djgpp 1.12 distribution does have some files appropriate for DOS (configur.bat, *.sed, etc.) My question is: can I copy these files into the appropriate locations in teh 2.7.1 distribution and run them, or have things changed sufficiently (e.g. different set of modules) that the libraries would not build correctly? If this won't work, is something available (perhaps with the djgpp V2 distribution?)? Thanks in advance. --------------------------------------------------------------------- Michael Wesolowski (mewesolo AT freenet DOT calgary DOT ab DOT ca)