Xref: news-dnh.mv.net comp.os.msdos.djgpp:4154
Path: news-dnh.mv.net!mv!news.sprintlink.net!cs.utexas.edu!usc!hookup!news.nstn.ca!coranto.ucs.mun.ca!usenet
From: saustin AT terra DOT nlnet DOT nf DOT ca (Steve Austin)
Newsgroups: comp.os.msdos.djgpp
Subject: GRX 1.03 text problems
Date: Sun, 07 Jan 1996 02:03:15 GMT
Organization: Kickham Productions
Lines: 17
Message-ID: <4cn9lb$unb@coranto.ucs.mun.ca>
NNTP-Posting-Host: n79h007.nlnet.nf.ca
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

I'm having problems with the text output functions of GRX 1.03. The
characters displayed are members of the ascii set, but are 8 behind in
the table, ie "A" is displayed as "9", "B" as ":" etc. Some characters
appear to be scrolled vertically.

The selected font doesn't seem to matter, and I've used both the
standard and the Cirrus54 drivers with the same result.

I'm using 1.12m4 with GCC 2.6.3 on a P90. The video card is a Cirrus
5430 PCI with 1MB. As far as I can tell, the GRX graphics functions
work OK - any suggestions would be gratefully received.



Steve Austin
saustin AT terra DOT nlnet DOT nf DOT ca